Gradall G6-42P

Series: Gradall Telescopic Forklift

The photo shows the 534D10-45 from the same series. Source: https://expomash.ru/product/stroitelnaya-tekhnika-teleskopic

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Gradall Telescopic Forklift series from Gradall includes the G6-42P. The engine delivers 100.7 hp (74 kW), has 4 cylinders, with a displacement of 4,501.5 cm³. The unladen weight is 10,646 kg. The wheelbase measures 3,301 mm. The tank holds 174.1 litres. Maximum torque is reached at 2,500 rpm. Working pressure is 434.4 bar. The electrical system runs on 12 V. The engine fitted is the e 4045DF150. Tyre size: 13,00x24 12PR. The Gradall Telescopic Forklift series covers 4 models. Rated output within it ranges from 100.7 to 126.5 hp; the G6-42P sits at the bottom of that range with 100.7 hp. Its immediate neighbours are the 534D9-45 above it with 111.5 hp. 4 Gradall models are on record. The model is listed under Telehandlers. 13 verified figures from 1 source are on file.

Gradall 534D9-45 to G6-42P – telescopic handlers from Ohio: John Deere four-cylinders, 74 to 93.1 kW, 10,646 to 15,227 kg operating weight

Gradall Industries, based in New Philadelphia, Ohio, is best known for its wheeled excavators in which the boom itself is built as a telescoping arm; this telescoping expertise also fed into the company's own range of telehandlers for industrial and construction use. The ranges covered here, 534D9-45, 534D10-45, 544D10-55 and G6-42P, form the heavy class of this line-up.

Read on 3 more paragraphs

The register lists here 4 versions with 74 to 93.1 kW rated output, operating weights of 10,646 to 15,227 kg and overall heights of 2,360 to 2,480 mm. The telehandlers are powered by John Deere four-cylinder engines of the 4045 range with around 4,502 cm³ displacement.

Telehandlers in this load and weight class are used on industrial sites, in steel and plant construction and for heavy lifting and placing work where the reach and lift capacity of a telescopic arm is required; Gradall competes here with JCB, Manitou and JLG.

On a used purchase, the condition of the telescopic slides and wear pads inside the boom, the tightness of the hydraulic cylinders, the John Deere engine's service history, tyre condition and the operation of the stabiliser legs count; spare parts run through the Gradall dealer network.

Sources: Kennwerte der Modelle Gradall Telescopic Forklift, Gradall Industries (Hersteller)

Technical data

Engine

Engine model	e 4045DF150correct
Power	100.7 hp (74 kW)correct
Speed at max. torque	2,500 rpmcorrect
Cylinders	4correct
Displacement	4,501.5 cm³correct
Aspiration	turbochargedcorrect

Dimensions and weights

Height	2,380 mmcorrect
Wheelbase	3,301correct
Unladen weight	10,646 kgcorrect

Drivetrain and chassis

Tyre size	13.00x24 12PRcorrect

Working data

Lift height	12,800 mmcorrect
Hydraulic pressure	434.4correct
Fuel tank capacity	174.1 lcorrect

Other data

System voltage	12 Vcorrect

Where this model stands

Power-to-weight ratio: 7 kW/t (74 kW / 10.6 t)

Stronger than 34% of the telehandlers in the register — out of 661 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Gradall G6-42P have?

The Gradall G6-42P delivers 101 hp.

How much does the Gradall G6-42P weigh?

The unladen weight is 10,646 kg.

What engine does the Gradall G6-42P have?

4 cylinders, 4,502 cm³ displacement.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →