GP CPD20
Series: GP Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a forklift truck, the GP CPD20 belongs to the GP Forklift series. The engine produces 8.7 kW.
It will not go faster than 14 km/h — a working pace, not a travelling one. Operating weight comes to 3,980 kg. It carries 2,000 kg.
Within the range, rated power spans from 7.5 to 22.1 kW; with 8.7 kW, the CPD20 sits in the lower third. Directly alongside are the CPD15 with 7.5 kW below and the CPD25 with 10.1 kW above.
Technical data
Engine
| Power | 8.7 kWcorrect |
|---|
Dimensions and weights
| Width | 1,170 mmcorrect |
|---|---|
| Ground clearance | 105.2 mmcorrect |
| Unladen weight | 3,980 kgcorrect |
Drivetrain and chassis
| Top speed | 14 km/hcorrect |
|---|
Working data
| Lifting capacity | 2,000 kgcorrect |
|---|---|
| Lift height | 4,030 mmcorrect |
Other data
| Front wheels | 2correct |
|---|---|
| Kraftstoffart | electriccorrect |
| Lift speed | 25.8 m/mincorrect |
| Load centre | 500.1 mmcorrect |
| Rear wheels | 2correct |
| Senkgeschwindigkeit mmin | 36 m/mincorrect |
Where this model stands
Power-to-weight ratio: 2.2 kW/t (9 kW / 4 t)
Stronger than 23% of the forklift trucks in the register — out of 316 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the GP CPD20 have?
The GP CPD20 delivers 8.7 kW.
How much does the GP CPD20 weigh?
The unladen weight is 3,980 kg.
How fast does the GP CPD20 go?
Top speed is 14 km/h.
What is the load capacity of the GP CPD20?
Load capacity is 2,000 kg at a 500 mm load centre, lift height 4,030 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.