GP CPCD100CY
Series: GP Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine model | 6102-BGcorrect |
|---|---|
| Fuel | dieselcorrect |
| Rated speed | 2,500 rpmcorrect |
| Speed at max. torque | 1,650 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 5,781.4 cm³correct |
Dimensions and weights
| Width | 2,246.4correct |
|---|---|
| Ground clearance | 205.2correct |
| Unladen weight | 12,860 kgcorrect |
Drivetrain and chassis
| Top speed | 28 km/hcorrect |
|---|
Frequently asked questions
How much does the GP CPCD100CY weigh?
The unladen weight is 12,860 kg.
What engine does the GP CPCD100CY have?
6 cylinders, 5,781 cm³ displacement, DIESEL.
How fast does the GP CPCD100CY go?
Top speed is 28 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.