StartTractorsGoldoni › Star 75 Q Low

Goldoni Star 75 Q Low 4WD

Series: Star

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Goldoni Star 75 Q Low is a tractor from the Goldoni 4WD Tractor series. Power comes from a three-cylinder engine; from 2.9 litres it draws 53.7 kW. Rated speed is 2,500 rpm.

Within the range, rated power spans from 16 to 70 kW; with 53.7 kW, the Star 75 Q Low sits at the top. Directly alongside are the Star 75 Quadrifoglio Low with 53 kW below and the Quasar 85 with 61.1 kW above.

Technical data

Engine

Power53.7 kWcorrect
Rated speed2,500 rpmcorrect
Cylinders3correct
Displacement2,941.5 cm³correct

Drivetrain and chassis

Gearbox type40 speeds, a lever can be used to select the 8+8 transmission with synchromesh gearboxcorrect
Forward gears24correct
Reverse gears16correct
Tyre sizerear: 380/70x24, front: 280/70x16correct

Working data

Pump flow35.2 l/mincorrect

Other data

Height2,115.3correct

Frequently asked questions

How much power does the Goldoni Star 75 Q Low have?

The Goldoni Star 75 Q Low delivers 53.7 kW.

What engine does the Goldoni Star 75 Q Low have?

3 cylinders, 2,942 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare