StartTractorsGoldoni › Quasar 85

Goldoni Quasar 85 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the Goldoni Quasar 85 belongs to the Goldoni 4WD Tractor series. 61.1 kW is what the four-cylinder engine gets out of 2.8 litres. Rated power is reached at 2,300 rpm.

At 40 km/h, that is as fast as it goes. Empty, it weighs 2,200 kg.

Within the range, rated power spans from 16 to 70 kW; with 61.1 kW, the Quasar 85 sits at the top. Directly alongside are the Star 75 Q Tall with 53.7 kW below and the Star 85 Q Low with 61.9 kW above.

Technical data

Engine

Power61.1 kWcorrect
Rated speed2,300 rpmcorrect
Cylinders4correct
Displacement2,777.6 cm³correct
Aspirationturbochargedcorrect

Dimensions and weights

Ground clearance270correct
Unladen weight2,200 kgcorrect

Drivetrain and chassis

Gearbox type40 speeds, a lever can be used to select the 8+8 transmission with synchromesh gearboxcorrect
Forward gears8correct
Reverse gears8correct
Tyre sizeFront 280/70R20, Rear 320/70R24correct
Top speed40.1 km/hcorrect

Working data

Pump flow38.2 l/mincorrect
Fuel tank capacity50.3 lcorrect

Other data

Height2,151.9correct

Where this model stands

Power-to-weight ratio: 27.8 kW/t (61 kW / 2.2 t)

Power class: Universal (40–100 hp)

Stronger than 59% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Goldoni Quasar 85 have?

The Goldoni Quasar 85 delivers 61.1 kW.

How much does the Goldoni Quasar 85 weigh?

The unladen weight is 2,200 kg.

What engine does the Goldoni Quasar 85 have?

4 cylinders, 2,778 cm³ displacement.

How fast does the Goldoni Quasar 85 go?

Top speed is 40.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare