Goldoni Quad
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Goldoni Quad is a tractor made by Goldoni. Engine output is 16 kW.
It runs with MFWD.
It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 10 to 71 kW; with 16 kW, the Quad sits at the bottom end. Directly alongside are the Boxter 20 with 13 kW below and the BOXTER 25 with 17.5 kW above.
Technical data
Engine
| Engine make | Lombardinicorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 21.5 hp (16 kW)correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|
Frequently asked questions
How much power does the Goldoni Quad have?
The Goldoni Quad delivers 21.5 hp.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
1038
149 Special LUX
3050 DT
3460 Vigneron
49 TD
526
926
945 RS-DT
Aster 35
Aster 40
Aster 45
BOXTER 25
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.