Start › Electric motors › GE › 5KS215SAA1048A

GE 5KS215SAA1048A

Series: Other models

The photo shows the 5KS284SAA294 from the same series. Source: https://www.kleinanzeigen.de/s-anzeige/mercedes-w204-s204-c2

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

GE lists the 5KS215SAA1048A as a three-phase induction motor. The rated output is 5.6 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The housing is frame size 215 in flange-mounted form. The protection class is IP13 and IP55. The efficiency is 91.5 per cent at full load, 92 per cent at 75 per cent load and 91.3 per cent at half load. The mounting arrangement to IEC 60034-7 is V1. The motor is built in Mexico. The values are recorded in the Australian MEPS registration under the GEMS Determination 2019; measured to AS/NZS 1359.102.3:2000. Rated output across the GE range ranges from 0.75 to 150 kW; the 5KS215SAA1048A sits at the bottom of that range with 5.6 kW. Its immediate neighbours are the 5KFS112XAA2017 below it with 3.7 kW and the 5KFS162XAA2025 above it with 11 kW. 37 GE models are on record. The model is listed under Electric motors. 22 verified figures from 1 source are on file.

Technical data

Engine

Rated output5.6 kWcorrect

Electrical data

Number of poles2correct
Protection classIP13, IP55correct
Frame size215 (flange)correct
Mounting (IEC 60034-7)V1correct
Efficiency at full load91.5 %correct
Efficiency at 75 % load92 %correct
Efficiency at half load91.3 %correct

Origin and approval

Country of manufactureMexicocorrect
Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodAS/NZS 1359.102.3:2000correct

Frequently asked questions

How much power does the GE 5KS215SAA1048A have?

The GE 5KS215SAA1048A delivers 5.6 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

5KFS111XAA1008

5KFS112XAA1019

5KFS112XAA120

5KFS112XAA2017

5KFS162XAA2025

5KFS192XAA2025

5KFS193XAA2002

5KFS193XAA2003

5KFS193XAA2005

5KFS193XAA2006

5KFS193XAA2007

5KFS193XAA2008

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare