Start › Electric motors › GE › 5KFS193XAA2003

GE 5KFS193XAA2003

Series: Other models

The photo shows the 5KS284SAA294 from the same series. Source: https://www.kleinanzeigen.de/s-anzeige/mercedes-w204-s204-c2

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

GE lists the 5KFS193XAA2003 as a three-phase induction motor. The rated output is 22 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The housing is frame size 180 L in foot-mounted form. The protection class is IP55. The efficiency is 93.1 per cent at full load, 93.8 per cent at 75 per cent load and 93.6 per cent at half load. Mounting arrangements to IEC 60034-7: V5 and V6. The motor is built in Mexico. The data is based on the Australian MEPS registration under the GEMS Determination 2012; measured to IEEE 112-B(USA). Rated output across the GE range ranges from 0.75 to 150 kW; the 5KFS193XAA2003 sits at the bottom of that range with 22 kW. Its immediate neighbours are the 5KS284SAA2055W6 below it with 18.6 kW and the 5KS286SAA137 above it with 22.4 kW. 37 GE models are on record. The model is listed under Electric motors. 22 verified figures from 1 source are on file.

Technical data

Engine

Rated output22 kWcorrect

Electrical data

Number of poles4correct
Protection classIP55correct
Frame size180 L (foot)correct
Mounting (IEC 60034-7)V5, V6correct
Efficiency at full load93.1 %correct
Efficiency at 75 % load93.8 %correct
Efficiency at half load93.6 %correct

Origin and approval

Country of manufactureMexicocorrect
Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2012correct
Test methodIEEE 112-B(USA)correct

Frequently asked questions

How much power does the GE 5KFS193XAA2003 have?

The GE 5KFS193XAA2003 delivers 22 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

5KFS111XAA1008

5KFS112XAA1019

5KFS112XAA120

5KFS112XAA2017

5KFS162XAA2025

5KFS192XAA2025

5KFS193XAA2002

5KFS193XAA2005

5KFS193XAA2006

5KFS193XAA2007

5KFS193XAA2008

5KFS193XAA2010

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare