Start › Trucks over 7.5 t › FWD › 80444C

FWD 80444C

Built: 1956-1956 · Series: Other models

The photo shows the HAR from the same series. Source: https://en.wikipedia.org/wiki/File:FWD_HAR-1,_TM_9-815.jpg

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 80444C comes from FWD. Production: 1956. The engine has 6 cylinders. The machine is 2,470 mm wide. The unladen weight is 7,910 kg. The wheelbase measures 3,680 mm. The gross vehicle weight is 11,340 kg. The machine runs on 4 wheels. Unladen weight across the FWD range ranges from 11 to 27,600 kg; the 80444C sits in the lower part of that range with 7,910 kg. Its immediate neighbours are the HAR below it with 5,930 kg and the SU-COE above it with 8,050 kg. 15 FWD models across 8 series are on record. The model is listed under Trucks over 7.5 t. 8 verified figures from 1 source are on file.

Technical data

Engine

Cylinders6correct

Dimensions and weights

Width2,470 mmcorrect
Wheelbase3,680 mmcorrect
Unladen weight7,910 kgcorrect
Gross vehicle weight11,340 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the FWD 80444C weigh?

The unladen weight is 7,910 kg.

What is the gross vehicle weight of the FWD 80444C?

11,340 kg.

What engine does the FWD 80444C have?

6 cylinders.

When was the FWD 80444C built?

Production years: 1956.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

---

104-55

64-12 CRANCE CARNIER

64-12 CRANCE CARNIER

64-15G

64-15G

64-18 GROVE

64-18 GROVE

80444C

84-25G

84-25G

HAR

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare