Start › Trucks over 7.5 t › Fuso › Canter

Fuso Canter

Built: 2010-2026 · Series: CANTER

Source: https://www.fuso.co.nz/taxonomy/term/12

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Fuso Canter is a machine built by Fuso. Production: 2010-2026. The engine delivers 129 kW, has 4 cylinders, with a displacement of 2,998 cm³. The machine is 9,900 mm long and 2,600 mm wide. The unladen weight is 7,702 kg. The wheelbase measures 4,750 mm. Top speed is 141 km/h. The gross vehicle weight is 8,550 kg. The machine runs on 6 wheels. The gearbox offers 5 gears. Rated output across the Fuso range ranges from 110 to 129 kW; the Canter sits at the top of that range with 129 kW. Its immediate neighbours are the Canter 6S15 below it with 110 kW. 16 Fuso models across 2 series are on record. The model is listed under Trucks over 7.5 t. 15 verified figures from 1 source are on file.

Technical data

Engine

Power129 kWcorrect
Cylinders4correct
Displacement2,998 cm³correct

Dimensions and weights

Length9,900 mmcorrect
Width2,600 mmcorrect
Wheelbase4,750 mmcorrect
Unladen weight7,702 kgcorrect
Gross vehicle weight8,550 kgcorrect

Drivetrain and chassis

Gears5correct
Wheels6correct
Top speed141 km/hcorrect

Where this model stands

Power-to-weight ratio: 16.7 kW/t (129 kW / 7.7 t)

Stronger than 16% of the trucks over 7.5 t in the register — out of 27,776 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fuso Canter have?

The Fuso Canter delivers 129 kW.

How much does the Fuso Canter weigh?

The unladen weight is 7,702 kg.

What is the gross vehicle weight of the Fuso Canter?

8,550 kg.

What engine does the Fuso Canter have?

4 cylinders, 2,998 cm³ displacement.

How fast does the Fuso Canter go?

Top speed is 141 km/h.

What are the dimensions of the Fuso Canter?

9,900 mm × 2,600 mm.

When was the Fuso Canter built?

Production years: 2010-2026.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Used equipment offers
5 current listings for Fuso Canter on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

CANTER 7C15

CANTER 7C18 4X2 3400

CANTER 7C18 AMT 4X2 3850

CANTER FE4P10-02

CANTER HYBRID 7C15

Canter 6S15

Canter 7C18

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare