Foden S106T
Built: 2002-2002 · Series: Other models
More machines from model year 2002
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Foden – other models: the collective page of trucks outside the named ranges, from the S series to the 3000 Alpha, six-cylinder throughout, unladen weights 6,650 to 34,574 kg, gross weights up to 34,674 kg
This page gathers Foden trucks the register could not assign to a named range: the S series with models such as the S21, S39, S104T1 and S106T, the 8x6 four-axle CC8-10/30, three-axle tractor units, and the 3000 Alpha and 4400. Foden was founded in 1856 in Sandbach, Cheshire, initially as a maker of steam engines and steam wagons, and from the 1930s of diesel trucks. The shift from steam to diesel technology came with the use of Gardner engines, known for their fuel economy and durability. In 1980 the American maker PACCAR took over the brand; vehicle production in Sandbach ended in 2006.
Read on 3 more paragraphs
The register lists here 11 versions, six-cylinder throughout, with unladen weights from 6,650 to 34,574 kg, gross weights from 17,000 to 34,674 kg, lengths from 5,770 to 10,720 mm and widths from 2,460 to 2,600 mm.
The heavy class of multi-axle tractor units and construction vehicles shows Foden's focus on British heavy haulage, where the brand, alongside names such as ERF and Atkinson, counted among the long-established marques before yielding, under PACCAR, to DAF and Leyland. Fodens were also exported to Commonwealth countries, where their robust chassis proved themselves in mining and construction haulage.
Buying used, these historic chassis need checking for rust on the frame and axle mounts, the condition of the braking system and clutch, and the availability of engine and gearbox parts, which after the end of production are mostly found through specialist restoration workshops and vintage parts dealers.
Technical data
Engine
| Cylinders | 6correct |
|---|
Dimensions and weights
| Length | 6,350 mmcorrect |
|---|---|
| Width | 2,510 mmcorrect |
| Wheelbase | 4,000 mmcorrect |
| Unladen weight | 8,480 kgcorrect |
| Gross vehicle weight | 24,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the Foden S106T weigh?
The unladen weight is 8,480 kg.
What is the gross vehicle weight of the Foden S106T?
24,000 kg.
What engine does the Foden S106T have?
6 cylinders.
What are the dimensions of the Foden S106T?
6,350 mm × 2,510 mm.
When was the Foden S106T built?
Production years: 2002.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.