Flaman DK45SE HST Utility
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the Flaman DK45SE HST belongs to the Flaman Utility Tractor series. From 2.2 litres the engine produces 46 hp (33.6 kW). Rated output is reached at 2,600 rpm, so it works in the lower rev range.
Top speed is 28 km/h. It is 1.76 m wide. Wheelbase is 1.88 m.
Within the range, rated power spans from 19.3 to 54.7 hp; with 45.6 hp, the DK45SE HST sits at the top. Directly alongside are the DK40SE HST with 41.6 hp below and the DK55 with 54.7 hp above.
Technical data
Engine
| Engine model | 4A220LXHcorrect |
|---|---|
| Power | 45.6 hp (33.6 kW)correct |
| Rated speed | 2,600 rpmcorrect |
| Displacement | 2,197.5 cm³correct |
| Aspiration | naturalcorrect |
Dimensions and weights
| Width | 1,761.7correct |
|---|---|
| Wheelbase | 1,880.6correct |
Drivetrain and chassis
| Gearbox type | hydrostatic transmissioncorrect |
|---|---|
| Top speed | 28.5 km/hcorrect |
Working data
| Pump flow | 63.6 l/mincorrect |
|---|---|
| Fuel tank capacity | 45 lcorrect |
Frequently asked questions
How much power does the Flaman DK45SE HST have?
The Flaman DK45SE HST delivers 45.6 hp.
What engine does the Flaman DK45SE HST have?
2,198 cm³ displacement.
How fast does the Flaman DK45SE HST go?
Top speed is 28.5 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.