Flaman DK45S Utility
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Flaman DK45S is a tractor from the Flaman Utility Tractor series. The engine draws 46 hp (33.6 kW) from 2.2 litres. Rated power arrives at 2,600 rpm — the engine pulls from low down rather than needing to be revved.
It will not go faster than 28 km/h — a working pace, not a travelling one. It measures 1.76 m across. Wheelbase is 1.88 m.
Within the range, rated power spans from 19.3 to 54.7 hp; with 45.6 hp, the DK45S sits at the top. Directly alongside are the DK40SE HST with 41.6 hp below and the DK55 with 54.7 hp above.
Technical data
Engine
| Engine model | 4A220LXHcorrect |
|---|---|
| Power | 45.6 hp (33.6 kW)correct |
| Rated speed | 2,600 rpmcorrect |
| Displacement | 2,197.5 cm³correct |
| Aspiration | naturalcorrect |
Dimensions and weights
| Width | 1,761.7correct |
|---|---|
| Wheelbase | 1,880.6correct |
Drivetrain and chassis
| Gearbox type | manual gearbox synchromesh gearboxcorrect |
|---|---|
| Forward gears | 12correct |
| Reverse gears | 12correct |
| Top speed | 28 km/hcorrect |
Working data
| Pump flow | 63.6 l/mincorrect |
|---|---|
| Fuel tank capacity | 45 lcorrect |
Frequently asked questions
How much power does the Flaman DK45S have?
The Flaman DK45S delivers 45.6 hp.
What engine does the Flaman DK45S have?
2,198 cm³ displacement.
How fast does the Flaman DK45S go?
Top speed is 28 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.