Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Fiat › A.90.13

Fiat A.90.13

Built: 1980 · Series: Other models

More machines from model year 1980

The photo shows the COXX-LIFTBOX 70-40 from the same series. Source: https://www.landwirt.com/kleinanzeigen/detail/iveco-daily-ki

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Fiat A.90.13 is a machine built by Fiat. Production: 1980. The engine has 6 cylinders. The machine is 2,420 mm wide. The unladen weight is 6,940 kg. The wheelbase measures 4,700 mm. The gross vehicle weight is 8,800 kg. The machine runs on 4 wheels. Unladen weight across the Fiat range ranges from 525 to 12,516 kg; the A.90.13 sits in the middle of that range with 6,940 kg. Its immediate neighbours are the DUCATO 6X2 below it with 6,900 kg and the 160-90 DT-4X4/2890 above it with 7,060 kg. Gross vehicle weight across the Fiat range ranges from 850 to 25,200 kg; here the A.90.13 sits in the lower part of that range with 8,800 kg. 2638 Fiat models across 43 series are on record.

Fiat – other models: trucks and the Ducato motorhome base before Iveco was founded in 1975, from the 130 NC and 170 NT to Hymer and Borco-Höhns conversions, 60 to 132 kW, four- to eight-cylinders of 2.2 to 17.2 litres

This page gathers the Fiat trucks the register could not assign to a named range – from classic construction and long-haul trucks such as the 130 NC and 170 NT through light ranges such as the 50 NC to numerous motorhome and van conversions on the Ducato base, built by body converters such as Hymer and Borco-Höhns. Fiat built commercial vehicles in Turin from the early 1900s and in 1975 merged its heavy truck ranges together with OM, Lancia Veicoli Speciali, France's Unic and Germany's Magirus-Deutz into the newly founded Iveco; type codes such as NC (Nuova Cabina) or the number combinations before the dot usually denoted the power class, but a consistent system across all the model years gathered here can no longer be read through reliably.

Read on 3 more paragraphs

The register lists here 112 versions with 60 to 132 kW from four- to eight-cylinders of 2,184 to 17,174 cm³, unladen weights from 1,630 to 12,516 kg, gross weights from 3,495 to 25,200 kg, lengths from 5,380 to 9,700 mm and widths from 1,870 to 2,550 mm.

The span from light van chassis to heavy construction trucks shows how broad Fiat's commercial-vehicle programme was before the founding of Iveco; the Ducato motorhome base lives on today as the best-selling chassis among European motorhome makers, while the heavy ranges were absorbed into the Iveco type ranges.

On the classic truck chassis, what counts is the rust condition of frame and cab, engine and clutch condition, and parts availability through the Fiat and Iveco networks; on the Ducato-based motorhomes, additionally the condition of the body, dampness inside, and the service history of the particular motorhome maker.

Sources: SpecCodex register, model data: Fiat (weitere Modelle), Iveco (Nachfolgeunternehmen der Fiat-Lkw-Sparte)

Technical data

Engine

Cylinders6correct

Dimensions and weights

Width2,420 mmcorrect
Wheelbase4,700 mmcorrect
Unladen weight6,940 kgcorrect
Gross vehicle weight8,800 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Fiat A.90.13 weigh?

The unladen weight is 6,940 kg.

What is the gross vehicle weight of the Fiat A.90.13?

8,800 kg.

What engine does the Fiat A.90.13 have?

6 cylinders.

When was the Fiat A.90.13 built?

Production years: 1980.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare