Fiat 616 N3-4/4300
Built: 1972 · Series: Other models
More machines from model year 1972
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fiat – other commercial models: the collective page outside the named ranges, from the small vans Fiorino and Scudo to the truck types 615 and 616, displacement 900 to 3,450 cm³, weight 780 to 1,940 kg
This page gathers the Fiat commercial vehicles the register could not assign to a named range – from compact vans such as the Fiorino and the Scudo to the numbered truck and van types 217D, 238, 241, 242, 615 and 616 and the older 1100 T. Fiat Professional, the commercial-vehicle arm of the Turin-based group, builds its light vans partly at the Italian Atessa (Sevel) plant; the types listed here range from post-war Italian light trucks to modern panel vans with turbocharged four-cylinder engines.
Read on 3 more paragraphs
The register lists 11 versions here with displacements from 900 to 3,450 cm³ from four-cylinder engines, kerb weights from 780 to 1,940 kg, lengths from 4,590 to 5,420 mm and widths from 1,520 to 1,930 mm.
Across this range the page covers both light vans for urban distribution work and medium chassis for bodies such as flatbeds and box conversions, used in Italy and neighbouring markets alongside competitors such as Ford, Renault and group sibling Peugeot/Citroën.
For a used example, on the small vans check rust protection on sills and load floor, the condition of the clutch and timing belt, and the seal of the sliding doors; on the older numbered types, parts supply and the condition of the frame and brakes matter most, with parts usually sourced through independent commercial workshops and Fiat specialists.
Sources: SpecCodex register, model data: Fiat (weitere Modelle), Fiat (Stellantis, Hersteller)
Technical data
Engine
| Displacement | 3,450 cm³correct |
|---|
Dimensions and weights
| Length | 5,420 mmcorrect |
|---|---|
| Width | 1,930 mmcorrect |
| Unladen weight | 1,940 kgcorrect |
Frequently asked questions
How much does the Fiat 616 N3-4/4300 weigh?
The unladen weight is 1,940 kg.
What engine does the Fiat 616 N3-4/4300 have?
3,450 cm³ displacement.
What are the dimensions of the Fiat 616 N3-4/4300?
5,420 mm × 1,930 mm.
When was the Fiat 616 N3-4/4300 built?
Production years: 1972.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
