Technical register for agricultural, construction and commercial machinery · sourced data
StartTractorsFendt › FARMER 308LSA

Fendt FARMER 308LSA

Series: Farmer

The photo shows the Farmer 1 D from the same series. Source: https://www.kleinanzeigen.de/s-anzeige/fendt-farmer-1-trakto

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Fendt FARMER 308LSA is a tractor from the Farmer series.

Fendt Farmer – Base Name Spanning Several Decades, 1963 Into the 2000s

Fendt used the name Farmer as a base designation for tractors across several decades, documented in the register from the 1Z in 1963 to Farmer models from 2009. Output of the recorded models ranges from 18.3 to 82 kW, using two- to four-cylinder engines with displacement from 1,700 to 4,314 cm³.

Read on 2 more paragraphs

Recorded operating weight runs from 1,500 to 4,850 kg, wheelbase from 1,775 to 2,333 mm, and top speed of the listed models spans 19.6 to 40 km/h. This wide spread reflects the fact that both early post-war models and modern cabbed tractors with higher travel speeds carried the Farmer name.

At Fendt, the Farmer name consistently denoted the mid power class between the more compact models and the large Favorit tractors. For a used Farmer tractor, the exact generation matters most, as technology and equipment changed fundamentally over this long span.

Sources: Kennwerte der Modelle Fendt Farmer

Technical data

Engine

Torque275 Nmcorrect
Cylinders4correct
Displacement4,154 cm³correct

Dimensions and weights

Wheelbase2,280 mmcorrect

Drivetrain and chassis

Gearbox14V/4Rcorrect

Working data

Fuel tank capacity108 lcorrect

Other data

Linkage categoryCat IIcorrect
PTO speed540/1000 rpmcorrect

Frequently asked questions

What engine does the Fendt FARMER 308LSA have?

4 cylinders, 4,154 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare