Fendt 209 VA 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the Fendt 209 VA belongs to the Fendt 4WD Tractor series. 94 hp (66.1 kW) is what the four-cylinder engine gets out of 4.3 litres. Rated power arrives at 2,300 rpm — the engine pulls from low down rather than needing to be revved.
It will not go faster than 35 km/h — a working pace, not a travelling one. Unladen, it tips the scales at 2,400 kg.
Within the range, rated power spans from 65.3 to 500 hp; with 93.9 hp, the 209 VA sits at the bottom end. Directly alongside are the 307 CI with 92.5 hp below and the 309 Vario with 95.2 hp above.
Technical data
Engine
| Power | 93.9 hp (66.1 kW)correct |
|---|---|
| Rated speed | 2,300 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,314.7 cm³correct |
Dimensions and weights
| Unladen weight | 2,400 kgcorrect |
|---|
Drivetrain and chassis
| Gearbox type | Overdrive, fully synchronmesh, close-ratiocorrect |
|---|---|
| Forward gears | 20correct |
| Reverse gears | 6correct |
| Top speed | 35.1 km/hcorrect |
Working data
| Pump flow | 74.2 l/mincorrect |
|---|---|
| Hydraulic pressure | 200correct |
| Fuel tank capacity | 70 lcorrect |
Other data
| Height | 2,359.2correct |
|---|
Where this model stands
Power-to-weight ratio: 27.5 kW/t (66 kW / 2.4 t)
Power class: Universal (40–100 hp)
Stronger than 62% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Fendt 209 VA have?
The Fendt 209 VA delivers 93.9 hp.
How much does the Fendt 209 VA weigh?
The unladen weight is 2,400 kg.
What engine does the Fendt 209 VA have?
4 cylinders, 4,315 cm³ displacement.
How fast does the Fendt 209 VA go?
Top speed is 35.1 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.