Fendt 209 S 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Fendt 209 S is a tractor from the Fendt 4WD Tractor series. Power comes from a four-cylinder engine; from 4.3 litres it draws 94 hp (66.1 kW). With a rated speed of 2,300 rpm, it is built for pulling power, not for revving.
At 40 km/h, that is as fast as it goes. Empty, it weighs 3,100 kg.
Within the range, rated power spans from 65.3 to 500 hp; with 93.9 hp, the 209 S sits at the bottom end. Directly alongside are the 307 CI with 92.5 hp below and the 309 Vario with 95.2 hp above.
Technical data
Engine
| Power | 93.9 hp (66.1 kW)correct |
|---|---|
| Rated speed | 2,300 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,314.7 cm³correct |
Dimensions and weights
| Unladen weight | 3,100 kgcorrect |
|---|
Drivetrain and chassis
| Gearbox type | Overdrive, fully synchronmesh, close-ratiocorrect |
|---|---|
| Forward gears | 21correct |
| Reverse gears | 6correct |
| Top speed | 40.1 km/hcorrect |
Working data
| Pump flow | 47.3 l/mincorrect |
|---|---|
| Hydraulic pressure | 200correct |
| Fuel tank capacity | 72.3 lcorrect |
Other data
| Height | 2,502.4correct |
|---|
Where this model stands
Power-to-weight ratio: 21.3 kW/t (66 kW / 3.1 t)
Power class: Universal (40–100 hp)
Stronger than 62% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Fendt 209 S have?
The Fendt 209 S delivers 93.9 hp.
How much does the Fendt 209 S weigh?
The unladen weight is 3,100 kg.
What engine does the Fendt 209 S have?
4 cylinders, 4,315 cm³ displacement.
How fast does the Fendt 209 S go?
Top speed is 40.1 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.