Fendt 208 FA 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Fendt 208 FA is a tractor from the Fendt 4WD Tractor series. The four-cylinder engine, displacing 4.3 litres, produces 86 hp (59.1 kW). With a rated speed of 2,300 rpm, it is built for pulling power, not for revving.
At 40 km/h, that is as fast as it goes. Empty, it weighs 2,680 kg.
Within the range, rated power spans from 65.3 to 500 hp; with 85.7 hp, the 208 FA sits at the bottom end. Directly alongside are the 208 PA with 80.3 hp below and the 307 CI with 92.5 hp above.
Technical data
Engine
| Power | 85.7 hp (59.1 kW)correct |
|---|---|
| Rated speed | 2,300 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,314.7 cm³correct |
Dimensions and weights
| Unladen weight | 2,680 kgcorrect |
|---|
Drivetrain and chassis
| Gearbox type | Overdrive, fully synchronmesh, close-ratiocorrect |
|---|---|
| Forward gears | 20correct |
| Reverse gears | 6correct |
| Top speed | 40.1 km/hcorrect |
Working data
| Pump flow | 74.2 l/mincorrect |
|---|---|
| Hydraulic pressure | 200correct |
| Fuel tank capacity | 70 lcorrect |
Other data
| Height | 2,420.1correct |
|---|
Where this model stands
Power-to-weight ratio: 22.1 kW/t (59 kW / 2.7 t)
Power class: Universal (40–100 hp)
Stronger than 57% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Fendt 208 FA have?
The Fendt 208 FA delivers 85.7 hp.
How much does the Fendt 208 FA weigh?
The unladen weight is 2,680 kg.
What engine does the Fendt 208 FA have?
4 cylinders, 4,315 cm³ displacement.
How fast does the Fendt 208 FA go?
Top speed is 40.1 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.