Feldbinder TSA 37 3 3
Built: 1998 · Series: TSA
More machines from model year 1998
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Feldbinder TSA: the range of silo and tank semi-trailers for bulk goods, type logic from capacity and axle count, gross weight from 34 to 40 tonnes
Feldbinder's TSA range comprises silo and tank semi-trailers for transporting bulk goods such as cement, lime, flour or plastic granulate. The type designation combines a two- or three-digit number for capacity in cubic metres with the axle count after the dot – TSA 33.3, for example, being a three-axle unit with around 33 cubic metres of volume – while suffixes such as S and ADR denote special equipment and dangerous-goods approval.
Read on 3 more paragraphs
The register lists here 26 versions with unladen weights from 5,460 to 9,020 kg, gross weights from 34,000 to 40,000 kg, lengths from 10,550 to 14,040 mm and widths from 2,500 to 2,550 mm.
With gross weights of 34 to 40 tonnes and lengths of a good 10.5 to 14 metres, the TSA range sits in the class of classic silo semi-trailers used in the building-materials, food and plastics industries to transport powdered and granular goods; Feldbinder of Winsen an der Luhe, alongside Spitzer, is one of the leading European manufacturers of this vehicle type.
On a used example, check the tightness of the silo vessel and its dome covers, the condition of the pneumatic discharge system including the compressor or connections for external compressed air, corrosion on the vessel and frame – especially where it has been in contact with aggressive bulk goods – the operation of the brakes and air suspension, and, on ADR versions, the validity of the dangerous-goods inspection.
Sources: SpecCodex register, model data: Feldbinder TSA, Feldbinder Spezialfahrzeugwerke (manufacturer)
Technical data
Dimensions and weights
| Width | 2,500 mmcorrect |
|---|---|
| Wheelbase | 806 mmcorrect |
| Unladen weight | 7,860 kgcorrect |
| Gross vehicle weight | 39,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Feldbinder TSA 37 3 3 weigh?
The unladen weight is 7,860 kg.
What is the gross vehicle weight of the Feldbinder TSA 37 3 3?
39,000 kg.
Up to what speed is the Feldbinder TSA 37 3 3 approved?
Approved up to 100 km/h.
When was the Feldbinder TSA 37 3 3 built?
Production years: 1998.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
TSA 23.3
TSA 26 3
TSA 26.3 S
TSA 26.3S
TSA 27,3
TSA 30 3
TSA 30.03
TSA 30.3-1
TSA 31.3
TSA 31.3-2
TSA 313
TSA 32,3
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.