Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Faun › Other models › FA 019 8X8/165+190+170

Faun FA 019 8X8/165+190+170

Built: 2003 · Series: Other models

More machines from model year 2003

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The FA 019 8X8/165+190+170 comes from Faun. Production: 2003. The engine delivers 260 kW, with a displacement of 12,000 cm³. The vehicle is 11,730 mm long and 2,660 mm wide. The unladen weight is 47,100 kg. Rated output across the Faun range ranges from 205 to 390 kW; the FA 019 8X8/165+190+170 sits in the lower part of that range with 260 kW. Its immediate neighbours are the ATF 50-3-6X6/165+265 below it with 250 kW and the ATF 80-4-8X6/199+230+170 above it with 280 kW. Unladen weight across the Faun range ranges from 30,000 to 60,000 kg; here the FA 019 8X8/165+190+170 sits in the middle of that range with 47,100 kg. 89 Faun models across 13 series are on record.

Faun – other truck and crane models: the collective page of mobile cranes and special vehicles (ATF series), four- to twelve-cylinder engines from 205 to 390 kW, up to 72 t gross weight

Faun, originally based in Lauf an der Pegnitz, is known chiefly as a maker of mobile cranes, which since the brand's affiliation with Tadano have carried the ATF designation; the type codes follow a clear logic, where the number denotes lifting capacity in tonnes and the suffix "G-x" the number of axles, for example ATF70G-4 as a four-axle crane with 70 t capacity or ATF220G-5 as a five-axle crane with 220 t. This collective page additionally lists further chassis and special vehicles of the brand not sorted into their own ranges.

Read on 3 more paragraphs

The register lists 35 versions here with 205 to 390 kW from four- to twelve-cylinder engines of 3,400 to 15,928 cm³ displacement, kerb weights of 2,990 to 60,000 kg, gross vehicle weights of 3,500 to 72,000 kg, and widths from 2,150 to 3,000 mm.

Spanning light to heavy-lift cranes, the page covers the brand's entire mobile crane programme, used on construction sites, in industry, at wind farms and in disaster response, where it competes with makers such as Liebherr and Grove.

Buying used, such vehicles call for checking not only chassis condition but above all the operating hours and service history of the crane superstructure, the condition of the boom sections and outriggers, and the function of the hydraulics. Parts for the crane equipment run through the Tadano service network, and chassis and engine parts through the respective suppliers.

Sources: SpecCodex register, model data: Faun (weitere Modelle)

Technical data

Engine

Power260 kWcorrect
Displacement12,000 cm³correct

Dimensions and weights

Length11,730 mmcorrect
Width2,660 mmcorrect
Unladen weight47,100 kgcorrect

Where this model stands

Power-to-weight ratio: 5.5 kW/t (260 kW / 47.1 t)

Stronger than 43% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Faun FA 019 8X8/165+190+170 have?

The Faun FA 019 8X8/165+190+170 delivers 260 kW.

How much does the Faun FA 019 8X8/165+190+170 weigh?

The unladen weight is 47,100 kg.

What engine does the Faun FA 019 8X8/165+190+170 have?

12,000 cm³ displacement.

What are the dimensions of the Faun FA 019 8X8/165+190+170?

11,730 mm × 2,660 mm.

When was the Faun FA 019 8X8/165+190+170 built?

Production years: 2003.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare