Start › Electric motors › EMT › Y2AE 132M4

EMT Y2AE 132M4

Series: Y2AE

Source: https://www.topagrar.com/technik/news/amazone-precea-4500-2c

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The EMT Y2AE 132M4 is a three-phase induction motor built by EMT. The rated output is 7.5 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The rated voltage is 400 V. The housing is frame size 132 M in foot-mounted form. The protection class is IP55 and IP56. The efficiency is 90.1 per cent at full load, 90.2 per cent at 75 per cent load and 88.7 per cent at half load. The motor weighs 53.5 kg. At full load it delivers 49.6 Nm. Mounting arrangements to IEC 60034-7: B3, B5, B14, B34, B35, V1, V3 and V5. The motor is built in China. The data is based on the Australian MEPS registration under standard AS/NZS 1359.5:2004; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the EMT range ranges from 0.75 to 160 kW; the Y2AE 132M4 sits at the bottom of that range with 7.5 kW. Its immediate neighbours are the Y2E 132S4 below it with 5.5 kW and the e-Drive AHE 160M12 above it with 11 kW. 274 EMT models are on record. The model is listed under Electric motors. 24 verified figures from 1 source are on file.

Technical data

Engine

Rated output7.5 kWcorrect

Dimensions and weights

Weight53.5 kgcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles4correct
Protection classIP55, IP56correct
Frame size132 M (foot)correct
Mounting (IEC 60034-7)B3, B5, B14, B34, B35, V1, V3, V5correct
Efficiency at full load90.1 %correct
Efficiency at 75 % load90.2 %correct
Efficiency at half load88.7 %correct

Origin and approval

Country of manufactureChinacorrect
Standard appliedAS/NZS 1359.5:2004correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the EMT Y2AE 132M4 have?

The EMT Y2AE 132M4 delivers 7.5 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Y2AE 100L6

Y2AE 112M2

Y2AE 112M6

Y2AE 8012

Y2AE 8022

Y2AE 8024

Y2AE 90L2

Y2AE 90L4

Y2AE 90L6

Y2AE 90S2

Y2AE 90S4

Y2AE 90S6

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare