Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Electric motors › EMT › Y2-280S6

EMT Y2-280S6

Series: Other models

The photo shows the Y2-315L26 from the same series. Source: https://www.abb.com/global/en/products/3gbp281420-bdk

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The EMT Y2-280S6 is a three-phase induction motor. The rated output is 45 kW. The motor is six-pole, which at 50 Hz gives a synchronous speed of 1,000 rpm. The rated voltage is 415 V. The housing is frame size 280 S in foot-mounted form. The protection class is IP55. The efficiency is 92.9 per cent at full load, 92 per cent at 75 per cent load and 91 per cent at half load. The motor weighs 465 kg. At full load it delivers 439 Nm. The motor is built in China. The data is based on the Australian MEPS registration under standard AS/NZS 1359.5:2000 (Legacy); measured to IEEE 112-B(USA). Rated output across the EMT range ranges from 0.75 to 160 kW; the Y2-280S6 sits in the lower part of that range with 45 kW. Its immediate neighbours are the Y2E225S4 below it with 37 kW and the Y2-250M2 above it with 55 kW. 274 EMT models are on record. The model is listed under Electric motors. 24 verified figures from 1 source are on file.

EMT – other models: the collective page of MEPS-registered three-phase motors outside the named ranges, frame sizes 80 to 355, 0.75 to 160 kW, 2- to 8-pole

This page gathers the three-phase motors carried in the Australian energy-efficiency register under the EMT brand, which the register does not assign to a named range. No reliable information is available on EMT's headquarters or group ownership. Alongside the core MS designation with frame size and pole count (e.g. MS100L2), the model list also contains individual entries such as Fantech or Powerdrive, which could indicate OEM supply for other brands; exactly how these entries relate to the technical figures in the list cannot be reliably established from the dump.

Read on 3 more paragraphs

The register lists here 92 versions with 0.75 to 160 kW, two- to eight-pole, full-load efficiencies from 71.2 to 95.46% and at 75% load from 72.2 to 95.57%. Frame sizes run from 80 to 355 under IEC, mostly in protection rating IP55, a smaller share additionally with IP56 or IP02. Manufacturing is consistent in China, testing followed mostly the older 2000 Legacy standard, a smaller share the 2019 GEMS determinations, with test method A. Under the Australian High Efficiency Level only one of the 92 motors reaches the 2005 level, the remaining 91 carry no classification. Mounting codes mostly show the broad combination of foot, flange and vertical forms from B3 to V36.

The page thus covers a broad IEC standard-motor programme without significant efficiency certification; the wide spread of frame sizes up to 355 shows that alongside smaller drives, EMT also carries large industrial motors in its programme.

When buying used, what matters is bearing condition and a checked insulation resistance of the winding, visible overheating marks on the terminal box and fan cover, the condition of shaft and key, and a legible nameplate with frame size, pole count and efficiency class; for versions labelled Fantech or Powerdrive it is also worth checking whether they are indeed identical EMT motors. Spares depend on the distribution channel.

Sources: Kennwerte der Modelle EMT (weitere Modelle, MEPS-Registrierungen)

Technical data

Engine

Rated output45 kWcorrect

Dimensions and weights

Weight465 kgcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles6correct
Protection classIP55correct
Frame size280 S (foot)correct
Mounting (IEC 60034-7)B3, B5, B6, B7, B14, B34, V1, V3, V5, V6, V15, V18, V19, V36correct
Efficiency at full load92.9 %correct
Efficiency at 75 % load92 %correct
Efficiency at half load91 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedAS/NZS 1359.5:2000 (Legacy)correct
Test methodIEEE 112-B(USA)correct

Frequently asked questions

How much power does the EMT Y2-280S6 have?

The EMT Y2-280S6 delivers 45 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Fantech

Fantech Heff

HE280MX4

HE280S2

MS100L2

MS100L6

MS112M2

MS112M4

MS112M6

MS132M4

MS132MA6

MS132MB6

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare