Start › Electric motors › EMT › Y2-100L6

EMT Y2-100L6

Series: Other models

Source: https://www.kleinanzeigen.de/s-anzeige/diddl-hefte-kaeseblae

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The EMT Y2-100L6 is a three-phase induction motor. The rated output is 1.5 kW. The motor is six-pole, which at 50 Hz gives a synchronous speed of 1,000 rpm. The rated voltage is 415 V. The housing is frame size 100 L in foot-mounted form. The protection class is IP55. The efficiency is 75.9 per cent at full load, 76.9 per cent at 75 per cent load and 72.8 per cent at half load. At full load it delivers 15.2 Nm. The motor is built in China. The values are recorded in the Australian MEPS registration under standard AS/NZS 1359.5:2000 (Legacy); measured to IEEE 112-B(USA). Rated output across the EMT range ranges from 0.75 to 160 kW; the Y2-100L6 sits at the bottom of that range with 1.5 kW. Its immediate neighbours are the Y2E 90S4 below it with 1.1 kW and the e-Drive AHE 100L14 above it with 2.2 kW. 274 EMT models are on record. The model is listed under Electric motors. 23 verified figures from 1 source are on file.

Technical data

Engine

Rated output1.5 kWcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles6correct
Protection classIP55correct
Frame size100 L (foot)correct
Mounting (IEC 60034-7)B3, B5, B6, B7, B14, B34, V1, V3, V5, V6, V15, V18, V19, V36correct
Efficiency at full load75.9 %correct
Efficiency at 75 % load76.9 %correct
Efficiency at half load72.8 %correct

Origin and approval

Country of manufactureChinacorrect
Standard appliedAS/NZS 1359.5:2000 (Legacy)correct
Test methodIEEE 112-B(USA)correct

Frequently asked questions

How much power does the EMT Y2-100L6 have?

The EMT Y2-100L6 delivers 1.5 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Fantech

Fantech Heff

HE280MX4

HE280S2

MS100L2

MS100L6

MS112M2

MS112M4

MS112M6

MS132M4

MS132MA6

MS132MB6

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare