Start › Electric motors › EMT › e-Drive AHE 100L24

EMT e-Drive AHE 100L24

Series: e-Drive

The photo shows the e-Drive AHE 100L18 from the same series. Source: https://new.abb.com/news/fi/detail/112311/abb-tuo-ensimmaise

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

EMT lists the e-Drive AHE 100L24 as a three-phase induction motor. The rated output is 3 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The rated voltage is 400 V. The housing is frame size 100 L in foot-mounted form. The protection class is IP55 and IP56. The efficiency is 88.8 per cent at full load, 86.1 per cent at 75 per cent load and 81.7 per cent at half load. The motor is built in China. The figures come from the Australian MEPS register under the GEMS Determination 2012; measured to IEC 61972. Rated output across the EMT range ranges from 0.75 to 160 kW; the e-Drive AHE 100L24 sits at the bottom of that range with 3 kW. Its immediate neighbours are the Y2E 100L14 below it with 2.2 kW and the e-Drive AHE 112M2 above it with 4 kW. 274 EMT models are on record. The model is listed under Electric motors. 23 verified figures from 1 source are on file.

Technical data

Engine

Rated output3 kWcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles4correct
Protection classIP55, IP56correct
Frame size100 L (foot)correct
Mounting (IEC 60034-7)B3, B5, B14, B34, B35, V1, V3, V5, V14correct
Efficiency at full load88.8 %correct
Efficiency at 75 % load86.1 %correct
Efficiency at half load81.7 %correct

Origin and approval

Country of manufactureChinacorrect
Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2012correct
Test methodIEC 61972correct

Frequently asked questions

How much power does the EMT e-Drive AHE 100L24 have?

The EMT e-Drive AHE 100L24 delivers 3 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

e-Drive AHE 100L14

e-Drive AHE 100L18

e-Drive AHE 100L2

e-Drive AHE 100L28

e-Drive AHE 100L6

e-Drive AHE 112M2

e-Drive AHE 112M4

e-Drive AHE 112M6

e-Drive AHE 112M8

e-Drive AHE 132M16

e-Drive AHE 132M26

e-Drive AHE 132M4

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare