Technical register for agricultural, construction and commercial machinery · sourced data
StartElectric motorsElgi › 180L-4

Elgi 180L-4

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Elgi 180L-4 is a three-phase induction motor. The rated output is 22 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The rated voltage is 400 V. The housing is frame size 180 L in foot-mounted form. The protection class is IP55. The efficiency is 93 per cent at full load, 93.1 per cent at 75 per cent load and 91.8 per cent at half load. The mounting arrangement to IEC 60034-7 is B35. The motor is built in China. The values are recorded in the Australian MEPS registration under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Elgi range ranges from 3 to 75 kW; the 180L-4 sits in the lower part of that range with 22 kW. Its immediate neighbours are the X100083 below it with 18.5 kW and the 200L-4 above it with 30 kW. 29 Elgi models are on record. The model is listed under Electric motors. 21 verified figures from 1 source are on file.

ELGi – other models: the collective page of three-phase motors from the Indian compressor maker outside the named ranges, 3 to 75 kW, 2- to 4-pole, IP55, High Efficiency Level 2018

This page gathers the ELGi three-phase motors the Australian energy-efficiency register (GEMS/MEPS) could not assign to a named range. ELGi Equipments, headquartered in Coimbatore, India, and founded in 1960, is known chiefly as a compressor manufacturer, and the motors recorded in the register serve chiefly to drive its compressors. The model names mostly follow the IEC scheme of frame size and pole count, for example 160L-4 for the four-pole 160L version, alongside internal codes such as X100078.

Read on 3 more paragraphs

The register lists here 29 versions with 3 to 75 kW, two- to four-pole, at a uniform mains voltage of 400 V. Full-load efficiencies range from 87.21 to 95.04% and at 75% load from 86.89 to 94.73%; all 29 versions reach the High Efficiency Level 2018 classification. Frame sizes run from 100 to 280 under IEC, all motors carry protection rating IP55, mounting codes cover B3, B35 and their combination; manufacturing is mainly in China, with a smaller share in India, tested to the GEMS 2019 determinations with test method 2-1-1B.

As a drive for compressors, pumps and other industrial applications, the motor programme complements ELGi's core compressor business; the uniform High Efficiency Level 2018 classification shows a programme aligned with current efficiency requirements.

When buying used, what matters is bearing condition and a checked insulation resistance of the winding, visible overheating marks on the terminal box and fan cover, the condition of shaft and key, and a legible nameplate with frame size, pole count and efficiency class. Spares and service run through the ELGi sales network, particularly where the motor is fitted directly to an ELGi compressor.

Sources: Kennwerte der Modelle ELGi (weitere Modelle, MEPS-Registrierungen), ELGi Equipments (Hersteller)

Technical data

Engine

Rated output22 kWcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles4correct
Protection classIP55correct
Frame size180 L (foot)correct
Mounting (IEC 60034-7)B35correct
Efficiency at full load93.05 %correct
Efficiency at 75 % load93.09 %correct
Efficiency at half load91.78 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Elgi 180L-4 have?

The Elgi 180L-4 delivers 22 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare