Draco DTEAD 400-600
Built: 1975 · Series: Other models
More machines from model year 1975
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Draco – other models: the collective page of trailers outside the named ranges, from the RA through the RAO to the R series, up to 9.7 t gross vehicle weight, lengths up to 12.68 m
This page gathers the Draco trailers the register could not assign to a named range. The model names form several code families – R, RA, RAO and RTEAL – each followed by a number, plus standalone models such as DA800, DAMT 180, MDS 109 and MZS 220. It is notable that identical numbers such as 520 or 340 recur across several prefix families, for example in R 1535, RA 520 and RAO 340.
Read on 3 more paragraphs
The register lists here 18 versions with gross vehicle weights from 1,200 to 9,700 kg and widths from 1,790 to 2,600 mm; lengths are recorded for the longest versions from 6,970 to 12,680 mm.
With gross vehicle weights up to 9.7 t and lengths beyond 12 m, this collective page ranges from medium-duty trailers to long carriers for bulky loads. The parallel R, RA and RAO series stand for a broadly spread model programme within a mid-sized trailer line-up. Trailers across this range are mainly used by trade and municipal operators, who switch between shorter and longer versions depending on the job without changing tow vehicle.
When buying used at this class, check the frame and axle mounts for cracks and corrosion, the function of the brake system and lighting, wear on the axle bearings and tyres, and the condition of the tow eye and jockey leg. On the longer versions, also check the load-area capacity and the condition of any ramps or lashing points. On the shorter models, also check the condition of the side panels; on the longer versions, the load capacity of individual bed sections.
Sources: SpecCodex register, model data: Draco (weitere Modelle)
Technical data
Dimensions and weights
| Length | 12,680 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 8,300 mmcorrect |
| Unladen weight | 4,550 kgcorrect |
| Gross vehicle weight | 9,700 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Draco DTEAD 400-600 weigh?
The unladen weight is 4,550 kg.
What is the gross vehicle weight of the Draco DTEAD 400-600?
9,700 kg.
Up to what speed is the Draco DTEAD 400-600 approved?
Approved up to 100 km/h.
What are the dimensions of the Draco DTEAD 400-600?
12,680 mm × 2,500 mm.
When was the Draco DTEAD 400-600 built?
Production years: 1975.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.