StartVansDodge › DAKOTA

Dodge DAKOTA

Built: 1987-2010 · Series: DAKOTA

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Dodge DAKOTA is a machine built by Dodge. Production: 1987-2010. The engine delivers 170 kW, has 8 cylinders, with a displacement of 5,200 cm³. The machine is 4,980 mm long and 2,020 mm wide. The unladen weight is 2,210 kg. The wheelbase measures 3,430 mm. Top speed is 185 km/h. The gross vehicle weight is 2,810 kg. The machine runs on 4 wheels. The gearbox offers 5 gears. Rated output across the Dodge range ranges from 54 to 523 kW; the DAKOTA sits in the lower part of that range with 170 kW. Its immediate neighbours are the RAM VAN 3500-KB31Y/324 below it with 169 kW and the RAM VAN above it with 171 kW. 1193 Dodge models across 5 series are on record. The model is listed under Vans. 14 verified figures from 1 source are on file.

Technical data

Engine

Power170 kWcorrect
Cylinders8correct
Displacement5,200 cm³correct

Dimensions and weights

Length4,980 mmcorrect
Width2,020 mmcorrect
Wheelbase3,430 mmcorrect
Unladen weight2,210 kgcorrect
Gross vehicle weight2,810 kgcorrect

Drivetrain and chassis

Gears5correct
Wheels4correct
Top speed185 km/hcorrect

Where this model stands

Power-to-weight ratio: 76.9 kW/t (170 kW / 2.2 t)

Stronger than 97% of the vans in the register — out of 7,595 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Dodge DAKOTA have?

The Dodge DAKOTA delivers 170 kW.

How much does the Dodge DAKOTA weigh?

The unladen weight is 2,210 kg.

What is the gross vehicle weight of the Dodge DAKOTA?

2,810 kg.

What engine does the Dodge DAKOTA have?

8 cylinders, 5,200 cm³ displacement.

What are the dimensions of the Dodge DAKOTA?

4,980 mm × 2,020 mm.

When was the Dodge DAKOTA built?

Production years: 1987-2010.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare