Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Deutz › D40 S

Deutz D40 S

Built: 1961-1961 · Series: Other models

More machines from model year 1961

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Deutz D40 S rolled off the line in 1961 as a tractor. Power comes from a three-cylinder engine; from 2.5 litres it draws 28 kW.

It measures 3.50 m in length and 1.88 m in width. Unladen, it tips the scales at 2,040 kg.

Within the range, rated power spans from 10 to 163 kW; with 28 kW, the D40 S sits in the lower third. Directly alongside are the D4005 with 26 kW below and the D50 with 33.8 kW above.

Deutz – other models: the collective page of tractors outside the named ranges, from the D 30 and D 50 through the Agrostar to the Agrotron TTV, 10 to 163 kW, air-cooled Deutz diesel engines from Cologne

This page gathers the Deutz tractors the register could not assign to a named range – from the air-cooled D types of the 1950s to 1970s to the Agrostar, Agrotron and Agrofarm of the later Deutz-Fahr era. Deutz, founded in Cologne in 1864 as an engine works, is regarded as the world's oldest engine maker and began building tractors in 1907; in 1968 its agricultural arm merged with Fahr to form Deutz-Fahr. The type logic of the early D series gives the power class in hp after the D (D 30 around 30 hp, D 40 around 40 hp, D 50 around 50 hp), S stands for the version with PTO and hydraulics, N and NF for the standard version and its successor model; the Agrostar and Agrotron ranges from the 1980s carry the Deutz-Fahr names, though they are listed here still under the Deutz brand, TTV denotes the stepless transmission. A hallmark of Deutz across every generation is the air-cooled diesel engine, which dispenses with coolant and, in the F1L, F2L and F4L to F6L series, remained the unchanged basis of the engine range.

Read on 3 more paragraphs

The register lists here 33 versions with 10 to 163 kW from one- to six-cylinders of 850 to 6,128 cm³, unladen weights from 1,000 to 10,460 kg, gross weights from 2,800 to 12,000 kg, lengths from 2,650 to 4,972 mm, widths from 1,450 to 2,550 mm and torque from 181 to 549 Nm at 2,100 to 2,400 rpm.

For decades Deutz was one of the major German tractor makers, and with the air-cooled engine it built its own technical line alongside water-cooled competitors; the brand remains widespread today above all in Germany, southern Europe and parts of Africa and Latin America, where Deutz engines are also fitted outside tractors, in construction machinery and stationary applications.

On used tractors, the air-cooled engines call for checking the blower, cooling fins and V-belt, the newer Agrotron models the electronics and the condition of the TTV transmission, plus the clutch, hydraulic tightness and rust on cab and mudguards; parts run through today's Deutz-Fahr network, for older D types also through independent tractor-parts dealers.

Sources: Kennwerte der Modelle Deutz (weitere Modelle), Deutz-Fahr

Technical data

Engine

Power28 kWcorrect
Cylinders3correct
Displacement2,550 cm³correct

Dimensions and weights

Length3,500 mmcorrect
Width1,880 mmcorrect
Unladen weight2,040 kgcorrect
Gross vehicle weight2,800 kgcorrect

Drivetrain and chassis

Gears7correct
Forward gears7correct
Reverse gears3correct

Where this model stands

Power-to-weight ratio: 13.7 kW/t (28 kW / 2 t)

Power class: Compact (< 40 hp)

Stronger than 24% of the tractors in the register — out of 15,659 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Deutz D40 S have?

The Deutz D40 S delivers 28 kW.

How much does the Deutz D40 S weigh?

The unladen weight is 2,040 kg.

What is the gross vehicle weight of the Deutz D40 S?

2,800 kg.

What engine does the Deutz D40 S have?

3 cylinders, 2,550 cm³ displacement.

What are the dimensions of the Deutz D40 S?

3,500 mm × 1,880 mm.

When was the Deutz D40 S built?

Production years: 1961.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare