Technical register for agricultural, construction and commercial machinery · sourced data

Demag AC300-6

Built: 2020 · Series: AC

More machines from model year 2020

The photo shows the AC 40 CITY from the same series. Source: https://www.truck1.eu/construction-machinery/mobile-cranes/m

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the AC300-6, Demag offers a model from the AC series. Production: 2020. The engine delivers 430 kW, with a displacement of 15,569 cm³. The machine is 17,320 mm long and 3,000 mm wide. The unladen weight is 69,900 kg. The AC series covers 50 models. Rated output within it ranges from 205 to 480 kW; the AC300-6 sits in the upper part of that range with 430 kW. Its immediate neighbours are the AC5.220-1 below it with 405 kW and the AC350 above it with 448 kW. Unladen weight within it ranges from 32,650 to 95,750 kg; here the AC300-6 sits in the middle of that range with 69,900 kg. 89 Demag models across 10 series are on record.

Demag AC – road-registered all-terrain cranes from the compact City class to large cranes: AC 40 to AC 700, six to eight cylinders, 205 to 480 kW, operating weights up to 95,750 kg

Demag, which grew out of Duisburger Maschinenbau AG, has built mobile cranes since the 1960s and now operates as part of the crane group Tadano; the AC series denotes all-terrain cranes with road registration that, unlike lattice-boom crawler cranes, drive to the site on their own axles. The type number after AC roughly gives the maximum lifting capacity in tonnes, from the AC 40 with about 40 tonnes to the AC 700 with about 700 tonnes; suffixes such as -1, -2 or -5 mark the series generation, CITY the especially compact city cranes.

Read on 3 more paragraphs

The register lists here 26 versions with 205 to 480 kW from six- and eight-cylinders of 6,374 to 15,928 cm³ displacement, operating weights from 32,650 to 95,750 kg, gross weights from 33,000 to 96,000 kg and widths from 2,500 to 3,000 mm.

All-terrain cranes such as the AC series combine the road speed of trucks with the off-road capability of crawler cranes, making them the most versatile construction cranes for changing job sites; alongside Liebherr and Grove, Demag ranks among the established makers of this class and covers the full span with the AC range, from compact city cranes to large cranes for heavy-lift and wind-turbine assembly.

On a used example, the operating hours of the carrier and the superstructure, the condition of the telescopic boom (wear on the slide pads, tightness of the hydraulic cylinders), the operation of the winches and boom extension, and inspection records and maintenance history count, since cranes are subject to regular expert inspections; parts and service run through the Tadano Demag network.

Sources: SpecCodex register, model data: Demag AC

Technical data

Engine

Power430 kWcorrect
Displacement15,569 cm³correct

Dimensions and weights

Length17,320 mmcorrect
Width3,000 mmcorrect
Unladen weight69,900 kgcorrect

Where this model stands

Power-to-weight ratio: 6.2 kW/t (430 kW / 69.9 t)

Stronger than 95% of the mobile & rough terrain cranes in the register — out of 723 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Demag AC300-6 have?

The Demag AC300-6 delivers 430 kW.

How much does the Demag AC300-6 weigh?

The unladen weight is 69,900 kg.

What engine does the Demag AC300-6 have?

15,569 cm³ displacement.

What are the dimensions of the Demag AC300-6?

17,320 mm × 3,000 mm.

When was the Demag AC300-6 built?

Production years: 2020.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Mobile crane in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare