StartTractorsDavid Brown › 2D

David Brown 2D

Built: 1957-1957 · Series: Other models

Wikimedia Commons · CC BY-SA 3.0 · BulldozerD11 · Dateiseite

The David Brown 2D rolled off the line in 1957 as a tractor. Under the bonnet works a two-cylinder engine displacing 1.3 litres, producing 10.6 kW.

It combines a 4 speed 1 reverse gearbox with 2-WD. Dimensions are 3 m by 1.72 m. Unladen, it tips the scales at 965 kg.

It runs on diesel; the engine is air-cooled. As standard, it runs on 4.50x15 tyres at the front and 6.00x22 at the rear. Within the range, rated power spans from 10.6 to 66.9 kW; with 10.6 kW, the 2D sits at the bottom end. The next one up is the P25 with 22 kW.

Technical data

Engine

Fueldieselcorrect
Power14 hp (10.6 kW)correct
Cylinders2correct
Displacement1,262 cm³correct
Displacement1,200correct
Naturally aspiratednaturally aspiratedcorrect
Coolingair-cooledcorrect

Dimensions and weights

Length3,000 mmcorrect
Width1,720 mmcorrect
Unladen weight965 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox4 speed 1 reversecorrect
Gearbox makeDavid Browncorrect
Front tyres4.50x15correct
Rear tyres6.00x22correct

Working data

Linkage categoryMid mounted toolbarcorrect

Origin and approval

PlantMeltham, West Yorkshire, Englandcorrect

Where this model stands

Power-to-weight ratio: 11 kW/t (11 kW / 1 t)

Power class: Compact (< 40 hp)

Stronger than 3% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the David Brown 2D have?

The David Brown 2D delivers 14 hp.

How much does the David Brown 2D weigh?

The unladen weight is 965 kg.

What engine does the David Brown 2D have?

2 cylinders, 1,262 cm³ displacement, Diesel.

What are the dimensions of the David Brown 2D?

3,000 mm × 1,720 mm.

When was the David Brown 2D built?

Production years: 1957.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare