Start › Vans › Daihatsu › FEROZA

Daihatsu FEROZA

Built: 1991-1998 · Series: FEROZA

Source: https://commons.wikimedia.org/wiki/File:Daihatsu_Feroza_DX_1

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Daihatsu FEROZA is a machine built by Daihatsu. Production: 1991-1998. The engine delivers 70 kW, has 4 cylinders, with a displacement of 1,600 cm³. The machine is 3,680 mm long and 1,650 mm wide. The unladen weight is 1,399 kg. The wheelbase measures 2,190 mm. Top speed is 150 km/h. The gross vehicle weight is 1,650 kg. The machine runs on 4 wheels. Rated output across the Daihatsu range ranges from 33 to 75 kW; the FEROZA sits at the top of that range with 70 kW. Its immediate neighbours are the ROCKY below it with 67 kW and the 3D ROCKY EX TURBO-4X4/253 above it with 75 kW. 151 Daihatsu models across 5 series are on record. The model is listed under Vans. 13 verified figures from 1 source are on file.

Technical data

Engine

Power70 kWcorrect
Cylinders4correct
Displacement1,600 cm³correct

Dimensions and weights

Length3,680 mmcorrect
Width1,650 mmcorrect
Wheelbase2,190 mmcorrect
Unladen weight1,399 kgcorrect
Gross vehicle weight1,650 kgcorrect

Drivetrain and chassis

Wheels4correct
Top speed150 km/hcorrect

Where this model stands

Power-to-weight ratio: 50 kW/t (70 kW / 1.4 t)

Stronger than 28% of the vans in the register — out of 7,595 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Daihatsu FEROZA have?

The Daihatsu FEROZA delivers 70 kW.

How much does the Daihatsu FEROZA weigh?

The unladen weight is 1,399 kg.

What is the gross vehicle weight of the Daihatsu FEROZA?

1,650 kg.

What engine does the Daihatsu FEROZA have?

4 cylinders, 1,600 cm³ displacement.

How fast does the Daihatsu FEROZA go?

Top speed is 150 km/h.

What are the dimensions of the Daihatsu FEROZA?

3,680 mm × 1,650 mm.

When was the Daihatsu FEROZA built?

Production years: 1991-1998.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

FEROZA CABRIOTOP

FEROZA DX

FEROZA EL RESINTOP INJECT

FEROZA RESIN-TOP DX-INJ.

FEROZA RESIN-TOP EL-INJ.

FEROZA RESINTOP

FEROZA RESINTOP EL II INJ

FEROZA RESINTOP EL ING

FEROZA RESINTOP EL INJ

FEROZA RESINTOP INJECTION

FEROZA SOFT-TOP

FEROZA SOFTTOP

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare