Cuppers LVA 10-10
Built: 2012 · Series: LVA
More machines from model year 2012
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Cuppers LVA – Dutch trailer range from 7.1 to 10.1 t unladen weight at 18 to 28 t gross weight, around 9.1 to 9.9 m long
This page gathers Cuppers's LVA range. It covers several closely related versions, from the LVA 9-9 AL and 09-09 AL, through the 10-10 variants, to the LVA 10-18 AL and 10-18 L. The close kinship between the models also shows in the similar designations, which often differ only by an added letter.
Read on 3 more paragraphs
The register lists here 8 versions with unladen weights from 7,140 to 10,141 kg at a gross weight of 18,000 to 28,000 kg, lengths from 9,120 to 9,940 mm and widths from 2,540 to 2,600 mm. With a gross weight consistently above 10 t, the whole range falls into vehicle class O4.
Trailers in this weight class are used as centre-axle or tandem trailers behind trucks for carrying building materials, bulk goods or machinery. The narrow span in length and width across the range points to a largely shared base construction between the variants, which adapts to payload mainly through unladen weight and axle count. Because the range is technically highly standardised, parts such as axles, brakes or lighting can often be swapped between different LVA models.
Buying used within this range, the points that matter are the condition of the chassis and axles, the function of the braking system, wear on the deck or sides, and corrosion on load-bearing parts. The condition of the tyres and the validity of the periodic roadworthiness test should also be checked; spare parts run through the Cuppers dealer network.
Sources: SpecCodex register, model data: Cuppers LVA
Technical data
Dimensions and weights
| Width | 2,600 mmcorrect |
|---|---|
| Wheelbase | 520 mmcorrect |
| Unladen weight | 8,220 kgcorrect |
| Gross vehicle weight | 20,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Cuppers LVA 10-10 weigh?
The unladen weight is 8,220 kg.
What is the gross vehicle weight of the Cuppers LVA 10-10?
20,000 kg.
Up to what speed is the Cuppers LVA 10-10 approved?
Approved up to 100 km/h.
When was the Cuppers LVA 10-10 built?
Production years: 2012.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
