Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Buckets › Cobra Attachments NZ › Other models › Cobra Grab Bucket 9-11T

Cobra Attachments NZ Grab Bucket 9-11T

Series: Other models

Source: schaeffer.de

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Cobra Attachments NZ Cobra Grab Bucket 9-11T is an attachment in the Buckets category. It is a bucket used for excavation and material handling. It belongs to the Weitere Modelle series. The equipment type is Grapple bucket. It fits carrier machines from 9 to 11 tonnes operating weight. The unladen weight is 375 kg. The working width is 600 mm. The figures come from the manufacturer's data sheet and describe the base configuration; other equipment variants are possible. The Weitere Modelle series covers 3 models. Unladen weight within it ranges from 375 to 1,140 kg; the Cobra Grab Bucket 9-11T sits at the bottom of that range with 375 kg. Its immediate neighbours are the Cobra Grab Bucket 11-16T above it with 690 kg. 3 Cobra Attachments NZ models are on record.

Technical data

Dimensions and weights

Unladen weight375 kgcorrect

Working data

Working width600 mmcorrect

Other data

Carrier max.11 tcorrect
Carrier min.9 tcorrect

Frequently asked questions

How much does the Cobra Attachments NZ Cobra Grab Bucket 9-11T weigh?

The unladen weight is 375 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Manufacturer documentation, cobraattach.co.nz (retrieved August 2026) · Dealer data sheet, cobraattach.co.nz (retrieved August 2026) · How we check the data

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare