Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Electric motors › CMG › HGM

CMG HGM

Series: HGM

Source: https://storage.googleapis.com/dcddrylhpctfxe/electric-motor
The CMG HGM is a three-phase induction motor. The rated output is 0.75 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 415 V. The housing is frame size 80 M in foot-mounted form. The protection class is IP55. The efficiency is 82.2 per cent at full load, 82.6 per cent at 75 per cent load and 80.7 per cent at half load. The motor weighs 19 kg. The motor is built in China. The values are recorded in the Australian MEPS registration under the GEMS Determination 2012; measured to AS 1359.102.1:1997. Rated output across the CMG range ranges from 0.75 to 160 kW; the HGM sits at the bottom of that range with 0.75 kW. Its immediate neighbours are the CWC3664BM2 above it with 0.93 kW. 815 CMG models are on record. The model is listed under Electric motors. 28 verified figures from 1 source are on file.

CMG HGM – other models: the collective page of MEPS-registered three-phase motors from the Australian supplier outside the named versions, HGM range made in China, frame sizes 80 to 315, 0.75 to 90 kW, 2- to 8-pole

This page gathers the HGM-range three-phase motors from CMG the Australian energy-efficiency register could not assign to a named model. CMG is an Australian industrial-motor business that sells three-phase motors for the Australian market; according to the register entries, manufacturing is in China. Model designations such as HGM 100LA-8 or HGM 315L8 combine the IEC frame size with the build length (LA, MA, MB) and the pole count at the end.

Read on 3 more paragraphs

The register lists here 13 versions with 0.75 to 90 kW, two- to eight-pole, full-load efficiencies from 73.3 to 94.2% and at 75% load from 72.4 to 94%. Frame sizes run from 80 to 315, protection is overwhelmingly IP55, voltage is uniformly 415 V. Testing mostly followed the 2019 GEMS determination, consistently with test method A; of 13 motors, 8 reach the 2005 High Efficiency Level, the remaining 5 stay unclassified.

The HGM range forms the multi-pole standard-motor block within CMG's programme, from eight- to two-pole, and positions itself as a value alternative to ABB, Siemens or WEG for pumps, fans, conveyors and general drive tasks in the Australian market.

When buying used, bearing condition and a checked insulation resistance of the winding, the visible condition of the terminal box and fan cover, the condition of shaft and key, and a legible nameplate with frame size, pole count and efficiency class all matter; spares run through CMG's Australian distribution.

Sources: Kennwerte der Modelle CMG Hgm (weitere Modelle, MEPS-Registrierungen)

Technical data

Engine

Engine familyHGMcorrect
Engine familiesHGMcorrect
Rated output0.75 kWcorrect

Dimensions and weights

Weight19 kgcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles2correct
Protection classIP55correct
Frame size80 M (foot)correct
Mounting (IEC 60034-7)B3, B5, B6, B7, B8, B14, B34, B34, B35, V1, V3, V5, V6, V18, V19correct
Efficiency at full load82.2 %correct
Efficiency at 75 % load82.6 %correct
Efficiency at half load80.7 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2012correct
Test methodAS 1359.102.1:1997correct

Frequently asked questions

How much power does the CMG HGM have?

The CMG HGM delivers 0.8 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 28 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

HGM 100LA-8

HGM 112M-8

HGM 132M-8

HGM 132S-8

HGM 160L-8

HGM 160MA-8

HGM 160MB-8

HGM 180L-8

HGM 200L-8

HGM 225M-8

HGM 225S-8

HGM 315L8

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare