Citroën H Van
Built: 1947-1981 · Series: Light commercial vehicle (M)
More machines from model year 1947
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Citroën H Van belongs to the Light commercial vehicle (M) series; it rolled off the line as a van in 1947-1981.
Gearbox: 3-speed manual gearbox and single dry plate clutch; drive type: FF layout. The vehicle is 4.26 m long, 1.99 m wide and 2.30 m high. Wheelbase is 2.44 m.
Technical data
Engine
| Engine | petrol: 1628 cc type 72 I4 1911 cc 11D/type 78 I4 diesel: 1621 cc Perkins 4.99 I4 1816 cc Indenor TMD85 I4 1948 cc Indenor XD88 I4correct |
|---|
Dimensions and weights
| Length | 4,260 mmcorrect |
|---|---|
| Width | 1,990 mmcorrect |
| Height | 2,300 mmcorrect |
| Wheelbase | 2,443 mmcorrect |
Drivetrain and chassis
| Drive | FF layoutcorrect |
|---|---|
| Gearbox | 3-speed manual gearbox, single dry plate clutchcorrect |
Other data
| Preceded by | Citrocorrect |
|---|---|
| Tub succeeded by | Citrocorrect |
Frequently asked questions
What are the dimensions of the Citroën H Van?
4,260 mm × 1,990 mm × 2,300 mm.
When was the Citroën H Van built?
Production years: 1947-1981.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Tractor & Construction Plant Wiki (retrieved August 2026) · Wikipedia (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
