Technical register for agricultural, construction and commercial machinery · sourced data
StartVansCitroën › FOURGON 2.2HDI-YCBMFB/345

Citroën FOURGON 2.2HDI-YCBMFB/345

Built: 2009-2009 · Series: Jumper

More machines from model year 2009

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Jumper series from Citroën includes the FOURGON 2.2HDI-YCBMFB/345. Production: 2009. The engine delivers 88 kW, with a displacement of 2,190 cm³. The machine is 5,420 mm long and 2,050 mm wide. The unladen weight is 1,925 kg. The gross vehicle weight is 3,500 kg. The Jumper series covers 261 models. Rated output within it ranges from 62 to 94 kW; the FOURGON 2.2HDI-YCBMFB/345 sits in the upper part of that range with 88 kW. Its immediate neighbours are the 2.5TDI-233J42-FOURGON/370 below it with 79 kW and the 2.8HDI-233JL2-FOURGON/370 above it with 94 kW. 1180 Citroën models across 10 series are on record. The model is listed under Vans. 7 verified figures from 1 source are on file.

Citroën Jumper – large panel van from the Sevel plant at Val di Sangro since 1994, sister model to the Fiat Ducato and Peugeot Boxer: L1–L3/H1–H3 body kit, 1.9 to 3.0-litre HDi diesels

The Jumper emerged in 1994 from the Sevel cooperation between PSA (Citroën/Peugeot) and Fiat at the Val di Sangro plant (Atessa, Italy) and is technically almost identical to the Fiat Ducato and Peugeot Boxer; the third generation has run since 2006 (facelifts in 2014 and 2019). Type designations in the register combine a weight-class number (27, 29, 30, 33, 35 for gross weight in hundreds above 3 tonnes), a length code (L1 to L3) and height code (H1 to H3), and the engine designation – HDi denotes the common-rail diesel used since 1999, older models still ran naturally aspirated (D) or turbo diesels (TD).

Read on 3 more paragraphs

The register lists 294 versions with 62 to 120 kW output, displacements of 1,900 to 2,999 cm³ (all four-cylinder), unladen weights of 1,590 to 3,360 kg, gross weights of 2,223 to 3,510 kg and widths of 1,900 to 2,550 mm; only 30 length values are on record, ranging from 4,963 to 7,400 mm.

As a 3-tonne-class van the Jumper competes with the Mercedes-Benz Sprinter, Ford Transit, Renault Master and Volkswagen Crafter; the Sevel platform makes it technically near-identical to the Ducato and Boxer, which helps when sourcing parts or choosing a workshop.

On used examples, check rust at the sliding-door rails, wheel arches and floor, condition of the dual-clutch or manual gearbox, injectors and EGR valve on the HDi engines, timing-belt change intervals, and mileage relative to use (courier work, motorhome base, trade van).

Sources: Kennwerte der Modelle Citroën Jumper, Citroën (Hersteller)

Technical data

Engine

Power88 kWcorrect
Displacement2,190 cm³correct

Dimensions and weights

Length5,420 mmcorrect
Width2,050 mmcorrect
Unladen weight1,925 kgcorrect
Gross vehicle weight3,500 kgcorrect

Where this model stands

Power-to-weight ratio: 45.7 kW/t (88 kW / 1.9 t)

Stronger than 53% of the vans in the register — out of 7,147 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Citroën FOURGON 2.2HDI-YCBMFB/345 have?

The Citroën FOURGON 2.2HDI-YCBMFB/345 delivers 88 kW.

How much does the Citroën FOURGON 2.2HDI-YCBMFB/345 weigh?

The unladen weight is 1,925 kg.

What is the gross vehicle weight of the Citroën FOURGON 2.2HDI-YCBMFB/345?

3,500 kg.

What engine does the Citroën FOURGON 2.2HDI-YCBMFB/345 have?

2,190 cm³ displacement.

What are the dimensions of the Citroën FOURGON 2.2HDI-YCBMFB/345?

5,420 mm × 2,050 mm.

When was the Citroën FOURGON 2.2HDI-YCBMFB/345 built?

Production years: 2009.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare