Technical register for agricultural, construction and commercial machinery · sourced data
StartVansChevrolet › STEPSIDE PICK UP

Chevrolet STEPSIDE PICK UP

Built: 1958-1993 · Series: STEPSIDE

More machines from model year 1958

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Chevrolet STEPSIDE PICK UP is a machine built by Chevrolet. Production: 1958-1993. The engine delivers 129 kW, has 8 cylinders, with a displacement of 5,365 cm³. The machine is 4,750 mm long and 2,005 mm wide. The unladen weight is 1,855 kg. The wheelbase measures 3,130 mm. The gross vehicle weight is 2,810 kg. The machine runs on 4 wheels. The gearbox offers 3 gears. Rated output across the Chevrolet range ranges from 16 to 365 kW; the STEPSIDE PICK UP sits in the lower part of that range with 129 kW. Its immediate neighbours are the G20 Van below it with 127 kW and the 2500 FLEETSIDE PICKUP-FC24C/3340 above it with 130 kW. 2620 Chevrolet models across 10 series are on record. The model is listed under Vans. 13 verified figures from 1 source are on file.

Chevrolet Stepside – the stepped-fender load bed from the Task Force Apache to the C/K: six- and eight-cylinders of 3.9 to 6.2 litres, 82 to 184 kW, 1,490 to 2,290 kg unladen weight

Stepside does not denote a model but a load-bed form on Chevrolet's pickups: a narrow platform with external fenders and a step between cab and bed, common since the 1930s, which became the traditional alternative once the wide, smooth-sided Fleetside bed arrived in 1958. This page gathers Stepside models across several generations, from the late-1950s Task Force range with the Apache name through the 3100 and 3600 ranges to the later C/K pickups; export versions fitted with a diesel engine are included too. The combination of the Stepside bed with a six- or eight-cylinder engine remained orderable into the 1980s, after which the Fleetside form prevailed.

Read on 3 more paragraphs

The register lists here 25 versions with 82 to 184 kW from six to eight cylinders of 3,859 to 6,200 cm³ displacement, unladen weights from 1,490 to 2,290 kg, gross vehicle weights from 2,086 to 3,468 kg, lengths from 4,750 to 5,100 mm and widths from 1,850 to 2,220 mm.

Among collectors the Stepside is regarded as the more classic and visually distinctive bed form compared with the more practical Fleetside, and restored 1950s Task Force examples draw correspondingly high attention; in everyday use it largely vanished from the market in favour of the wider bed.

Buying used, on Stepside pickups the rust condition of the external fenders and the step – classic weak points of this design – the soundness of the bed's wood floor, the condition of engine and carburettor on the older model years, and the originality of chrome trim and mouldings all count; parts for the Task Force and early C/K generations run through specialised US classic-truck dealers.

Sources: Kennwerte der Modelle Chevrolet Stepside, Chevrolet (General Motors, Hersteller)

Technical data

Engine

Power129 kWcorrect
Cylinders8correct
Displacement5,365 cm³correct

Dimensions and weights

Length4,750 mmcorrect
Width2,005 mmcorrect
Wheelbase3,130 mmcorrect
Unladen weight1,855 kgcorrect
Gross vehicle weight2,810 kgcorrect

Drivetrain and chassis

Gears3correct
Wheels4correct

Where this model stands

Power-to-weight ratio: 69.5 kW/t (129 kW / 1.9 t)

Stronger than 89% of the vans in the register — out of 7,147 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Chevrolet STEPSIDE PICK UP have?

The Chevrolet STEPSIDE PICK UP delivers 129 kW.

How much does the Chevrolet STEPSIDE PICK UP weigh?

The unladen weight is 1,855 kg.

What is the gross vehicle weight of the Chevrolet STEPSIDE PICK UP?

2,810 kg.

What engine does the Chevrolet STEPSIDE PICK UP have?

8 cylinders, 5,365 cm³ displacement.

What are the dimensions of the Chevrolet STEPSIDE PICK UP?

4,750 mm × 2,005 mm.

When was the Chevrolet STEPSIDE PICK UP built?

Production years: 1958-1993.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare