Technical register for agricultural, construction and commercial machinery · sourced data
StartTractorsChery › RC1000-A

Chery RC1000-A

Built: 2014-2014 · Series: Other models

More machines from model year 2014

The photo shows the RC904 from the same series. Source: https://www.lectura-specs.com/en/model/agricultural-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Built in 2014, the Chery RC1000-A is a tractor from Chery. The engine is rated at 75 kW.

It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 19 to 220 kW; with 75 kW, the RC1000-A sits in the upper third. Directly alongside are the RC954 with 71 kW below and the RC1104 with 82 kW above.

Technical data

Engine

Engine makeYTO/Yuchai/Quanchaicorrect
Fueldieselcorrect
Power100 hp (75 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driverear-wheel driveWDcorrect

Origin and approval

PlantWuhu, Anhui, Chinacorrect

Frequently asked questions

How much power does the Chery RC1000-A have?

The Chery RC1000-A delivers 100 hp.

When was the Chery RC1000-A built?

Production years: 2014.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare