Start › Electric motors › CEG › MT132S4-FHCH

CEG MT132S4-FHCH

Series: Other models

Source: https://www.kleinanzeigen.de/s-anzeige/elektromotor-mit-brem

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CEG MT132S4-FHCH is a three-phase induction motor from the CEG range. The rated output is 5.5 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The rated voltage is 400 V. The housing is frame size 132 S in foot-mounted form. The protection class is IP55. The efficiency is 85.8 per cent at full load, 87 per cent at 75 per cent load and 86.5 per cent at half load. The motor weighs 42 kg. At full load it delivers 36,681 Nm. Mounting arrangements to IEC 60034-7: B3, B5 and B14. The motor is built in Italy. The data is based on the Australian MEPS registration under standard AS/NZS 1359.5:2000 (Legacy); measured to AS 1359.102.1:1997. Rated output across the CEG range ranges from 0.75 to 160 kW; the MT132S4-FHCH sits at the bottom of that range with 5.5 kW. Its immediate neighbours are the XNPM36004003 below it with 4 kW and the DCTM32007503 above it with 7.5 kW. 509 CEG models are on record. The model is listed under Electric motors. 24 verified figures from 1 source are on file.

Technical data

Engine

Rated output5.5 kWcorrect

Dimensions and weights

Weight42 kgcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles4correct
Protection classIP55correct
Frame size132 S (foot)correct
Mounting (IEC 60034-7)B3, B5, B14correct
Efficiency at full load85.8 %correct
Efficiency at 75 % load87 %correct
Efficiency at half load86.5 %correct

Origin and approval

Country of manufactureItalycorrect
Standard appliedAS/NZS 1359.5:2000 (Legacy)correct
Test methodAS 1359.102.1:1997correct

Frequently asked questions

How much power does the CEG MT132S4-FHCH have?

The CEG MT132S4-FHCH delivers 5.5 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

AEHL-112M-28-4

AEHL-160M-42-4

AEHL-90L-24-4

AEUL-160M-42-2

AEUL-160M1-42-2

DCTM32000753

DCTM32001103

DCTM32001503

DCTM32002203

DCTM32003003

DCTM32004003

DCTM32005503

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare