Caterpillar Sixty

Built: 1925-1931 · Series: Other models

Wikimedia Commons · CC BY 3.0 · BrokenSphere · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Caterpillar Sixty is a machine built by Caterpillar. Production: 1925-1931. The engine delivers 65 hp (48 kW), has 4 cylinders. Drive: tracked undercarriage. The engine is water-cooled. Tyres: rear Tracks. The model was built in Peoria, Illinois, USA ; San Leandro, California, USA. The fuel is Gasoline (Petrol). Its predecessor was the Holt 60. Around 13,516 units were built. Rated output across the Caterpillar range ranges from 15 to 529 hp; the Sixty sits at the bottom of that range with 65 hp. Its immediate neighbours are the 933 Crawler Loader below it with 50 hp and the 941 Crawler Loader above it with 70 hp. 1091 Caterpillar models across 47 series are on record. The model is listed under Excavators & compaction. 16 verified figures from 1 source are on file.

Technical data

Engine

FuelGasoline (Petrol)correct
Power65 hp (48 kW)correct
Cylinders4correct
Coolingwater-cooledcorrect

Dimensions and weights

Width73 inch gaugecorrect

Drivetrain and chassis

Drivetracked undercarriagecorrect
Rear tyresTrackscorrect

Working data

Linkage categorynaturally aspiratedcorrect

Origin and approval

PlantPeoria, Illinois, USA; San Leandro, California, USAcorrect
Units built13.516correct
CabCanopycorrect
PredecessorHolt 60correct

Frequently asked questions

How much power does the Caterpillar Sixty have?

The Caterpillar Sixty delivers 65 hp.

What engine does the Caterpillar Sixty have?

4 cylinders, Gasoline (Petrol).

When was the Caterpillar Sixty built?

Production years: 1925-1931.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare