Start › Wheel loaders › Caterpillar › 938G Series II

Caterpillar 938G Series II

Series: Caterpillar Wheel Loader

Source: https://www.landwirt.com/marke-caterpillar

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Caterpillar 938G Series II belongs to the Caterpillar Wheel Loader series. The engine delivers 182.2 hp (134 kW), with a displacement of 7,200.5 cm³. Torque is 839.1 Nm. The unladen weight is 13,979 kg. The wheelbase measures 3,020.6 mm. Ground clearance is 411.5 mm. The tank holds 254 litres. The gearbox has 4 forward gears. There are also 3 reverse gears. The pump delivers 163.2 l/min. The hydraulic tank holds 90.1 litres. The cooling system holds 48.1 litres. The electrical system runs on 24 V. The engine fitted is the 3126B HEUI. Tyre size: 20,5R25. The Caterpillar Wheel Loader series covers 78 models. Rated output within it ranges from 42.6 to 1,598.9 hp; the 938G Series II sits at the bottom of that range with 182.2 hp. Its immediate neighbours are the 938K below it with 177.4 hp and the 950F above it with 182.5 hp. 1091 Caterpillar models across 47 series are on record. The model is listed under Wheel loaders. 19 verified figures from 1 source are on file.

Technical data

Engine

Engine model3126B HEUIcorrect
Power182.2 hp (134 kW)correct
Torque839.1correct
Displacement7,200.5 cm³correct
Aspirationturbochargedcorrect
Coolant capacity48.1 lcorrect

Dimensions and weights

Wheelbase3,020.6correct
Ground clearance411.5correct
Unladen weight13,979 kgcorrect

Drivetrain and chassis

Gearbox typeelectronic planetary powershift transmissioncorrect
Forward gears4correct
Reverse gears3correct
Tyre size20.5R25correct
System voltage24 Vcorrect

Working data

Pump flow163.2 l/mincorrect
Hydraulic oil capacity90.1 lcorrect
Fuel tank capacity254 lcorrect

Other data

Height3,310.1correct

Where this model stands

Power-to-weight ratio: 9.6 kW/t (134 kW / 14 t)

Stronger than 68% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Caterpillar 938G Series II have?

The Caterpillar 938G Series II delivers 182 hp.

How much does the Caterpillar 938G Series II weigh?

The unladen weight is 13,979 kg.

What engine does the Caterpillar 938G Series II have?

7,200 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

902

903C

904B

904H

906

906H

906H2

908

908H

910

910E

914G

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare