StartWheel loadersCaterpillar › 259B Series 3

Caterpillar 259B Series 3

Series: Caterpillar Multi Terrain Loader

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Caterpillar 259B Series 3 is a model in the Caterpillar Multi Terrain Loader series. The engine delivers 75 hp (52.9 kW), with a displacement of 3,293.8 cm³. The unladen weight is 4,052.4 kg. Ground clearance is 228.6 mm. The tank holds 84 litres. The hydraulic tank holds 55.3 litres. Working pressure is 229.9 bar. The cooling system holds 10.2 litres. The oil fill is 9.1 litres. The electrical system runs on 12 V. The engine fitted is the Cat C3,4T. The Caterpillar Multi Terrain Loader series covers 19 models. Rated output within it ranges from 58.8 to 95.3 hp; the 259B Series 3 sits in the middle of that range with 75 hp. Its immediate neighbours are the 267 below it with 63.9 hp and the 277 above it with 81.1 hp. 1091 Caterpillar models across 47 series are on record. The model is listed under Wheel loaders. 13 verified figures from 1 source are on file.

Technical data

Engine

Engine modelCat C3.4Tcorrect
Power75 hp (52.9 kW)correct
Displacement3,293.8 cm³correct
Coolant capacity10.2 lcorrect
Engine oil capacity9.1 lcorrect

Dimensions and weights

Ground clearance228.6correct
Unladen weight4,052.4 kgcorrect

Drivetrain and chassis

System voltage12 Vcorrect

Working data

Hydraulic oil capacity55.3 lcorrect
Hydraulic pressure229.9correct
Fuel tank capacity84 lcorrect

Other data

Height1,987.3correct

Where this model stands

Power-to-weight ratio: 13.1 kW/t (53 kW / 4.1 t)

Stronger than 21% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Caterpillar 259B Series 3 have?

The Caterpillar 259B Series 3 delivers 75 hp.

How much does the Caterpillar 259B Series 3 weigh?

The unladen weight is 4,052 kg.

What engine does the Caterpillar 259B Series 3 have?

3,294 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare