Case WX95

Series: Case Mobile Excavator

Wikimedia Commons · CC BY-SA 2.0 · Alexandre Prevot from Nancy, France · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case WX95 is a model in the Case Mobile Excavator series. The engine delivers 73.8 kW, has 4 cylinders, with a displacement of 3,900.1 cm³. Rated speed is 2,100 rpm. The machine is 609.3 mm wide. The unladen weight is 9,550 kg. The wheelbase measures 2,200.7 mm. Ground clearance is 292.6 mm. The tank holds 128.3 litres. The gearbox has 2 forward gears. There are also 2 reverse gears. The pump delivers 151 l/min. The hydraulic tank holds 94.3 litres. Working pressure is 350 bar. The cooling system holds 22.3 litres. The oil fill is 13.2 litres. The engine fitted is the 439TC-M2. Tyre size: 500/45-20. The Case Mobile Excavator series covers 7 models. Rated output within it ranges from 73.8 to 129 kW; the WX95 sits at the bottom of that range with 73.8 kW. Its immediate neighbours are the WX125 above it with 87.2 kW. 620 Case models across 22 series are on record. The model is listed under Excavators & compaction. 21 verified figures from 1 source are on file.

Technical data

Engine

Engine model439TC-M2correct
Power73.8 kWcorrect
Rated speed2,100 rpmcorrect
Cylinders4correct
Displacement3,900.1 cm³correct
Aspirationturbochargedcorrect
Coolant capacity22.3 lcorrect
Engine oil capacity13.2 lcorrect

Dimensions and weights

Width609.3correct
Wheelbase2,200.7correct
Ground clearance292.6correct
Unladen weight9,550 kgcorrect

Drivetrain and chassis

Gearbox typehydrostatic transmissioncorrect
Forward gears2correct
Reverse gears2correct
Tyre size500/45-20correct

Working data

Pump flow151 l/mincorrect
Hydraulic oil capacity94.3 lcorrect
Hydraulic pressure350 barcorrect
Fuel tank capacity128.3 lcorrect

Other data

Height3,026.7correct

Where this model stands

Power-to-weight ratio: 7.7 kW/t (74 kW / 9.6 t)

Stronger than 27% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case WX95 have?

The Case WX95 delivers 73.8 kW.

How much does the Case WX95 weigh?

The unladen weight is 9,550 kg.

What engine does the Case WX95 have?

4 cylinders, 3,900 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare