StartTelehandlersCase › TX742

Case TX742

Series: Case Telescopic Forklift

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TX742 from Case is part of the Case Telescopic Forklift series. The engine delivers 102.4 hp (70.8 kW), has 4 cylinders, with a displacement of 4,522.8 cm³. Torque is 400 Nm. Rated speed is 2,200 rpm. The unladen weight is 10,296.5 kg. The wheelbase measures 3,102.9 mm. Ground clearance is 566.9 mm. The tank holds 136.3 litres. The gearbox has 4 forward gears. There are also 4 reverse gears. The pump delivers 113.6 l/min. The hydraulic tank holds 185.5 litres. The electrical system runs on 12 V. The engine fitted is the Family IV 4,5 L. Tyre size: 13,00 x 24 14PR. The Case Telescopic Forklift series covers 13 models. Rated output within it ranges from 81.1 to 121.7 hp; the TX742 sits in the middle of that range with 102.4 hp. Its immediate neighbours are the 686G below it with 81.1 hp and the 686G XR above it with 111.5 hp. 620 Case models across 22 series are on record. The model is listed under Telehandlers. 19 verified figures from 1 source are on file.

Technical data

Engine

Engine modelFamily IV 4.5 Lcorrect
Power102.4 hp (70.8 kW)correct
Rated speed2,200 rpmcorrect
Torque400correct
Cylinders4correct
Displacement4,522.8 cm³correct
Aspirationturbochargedcorrect

Dimensions and weights

Wheelbase3,102.9correct
Ground clearance566.9correct
Unladen weight10,296.5 kgcorrect

Drivetrain and chassis

Gearbox typepowershift transmissioncorrect
Forward gears4correct
Reverse gears4correct
Tyre size13.00 x 24 14PRcorrect
System voltage12 Vcorrect

Working data

Pump flow113.6 l/mincorrect
Hydraulic oil capacity185.5 lcorrect
Fuel tank capacity136.3 lcorrect

Where this model stands

Power-to-weight ratio: 6.9 kW/t (71 kW / 10.3 t)

Stronger than 29% of the telehandlers in the register — out of 658 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case TX742 have?

The Case TX742 delivers 102 hp.

How much does the Case TX742 weigh?

The unladen weight is 10,296 kg.

What engine does the Case TX742 have?

4 cylinders, 4,523 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Telehandler in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare