Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Case IH › MX › MX 110

Case IH MX 110

Built: 1999-2000 · Series: MX

More machines from model year 1999

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the MX 110, Case IH offers a model from the MX series. Production: 1999-2000. The engine delivers 110 hp (82 kW), has 6 cylinders, with a displacement of 4,380 cm³. Torque is 454 Nm. Rated speed is 2,200 rpm. The machine is 4,300 mm long, 2,175 mm wide and 2,970 mm high. The unladen weight is 6,375 kg. The wheelbase measures 2,700 mm. The tank holds 263 litres. Transmission: 16 V/12 R and 32 V/24 R. The gross vehicle weight is 9,000 kg. The linkage is category II. The PTO runs at 540/1000 rpm. The MX series covers 15 models. Rated output within it ranges from 110 to 279 hp; the MX 110 sits at the bottom of that range with 110 hp. Its immediate neighbours are the MX 120 above it with 120 hp. Unladen weight within it ranges from 6,200 to 10,350 kg; here the MX 110 sits at the bottom of that range with 6,375 kg. 1222 Case IH models across 76 series are on record.

Case IH MX – the Maxxum and Magnum range from Doncaster and Racine, six-cylinder diesel engines, 82 to 233 kW, models from MX 110 to MX Magnum 220, torque up to 966 Nm

At Case IH, the MX designation covers two related ranges: the smaller Maxxum MX models, built in Doncaster, England, and the large Magnum MX models such as the MX Magnum 200 and MX Magnum 220, from the Racine plant in the US state of Wisconsin. Both ranges replaced the preceding Case and Case IH ranges in the 1990s and marked the transition to today's Puma and Magnum naming; the digits after MX give roughly the output in hp.

Read on 3 more paragraphs

The register lists here 15 versions with 82 to 233 kW (110 to 279 hp), all from six-cylinder diesel engines of 4,380 to 8,268 cm³ displacement and torque of 454 to 966 Nm at rated speeds of 2,000 to 2,200 rpm. Unladen weights range from 5,500 to 10,350 kg, permissible gross weight from 9,000 to 14,000 kg, lengths from 4,300 to 6,040 mm, widths from 2,012 to 3,048 mm and heights from 2,970 to 3,249 mm.

With this span, the MX range covered practically the entire field from multi-purpose tractor to large tractor for heavy tillage and competed directly with John Deere and Fendt in their respective power classes.

When buying an MX model used, transmission condition (synchro or powershift), hydraulic output, the four-wheel-drive transfer case on the large Magnum versions and corrosion on the cab and fenders rank among the key checkpoints; spare parts run through the Case IH dealer network.

Sources: SpecCodex register, model data: Case IH MX, Case IH (manufacturer)

Technical data

Engine

Power110 hp (82 kW)correct
Rated speed2,200 rpmcorrect
Torque454 Nmcorrect
Cylinders6correct
Displacement4,380 cm³correct

Dimensions and weights

Length4,300 mmcorrect
Width2,175 mmcorrect
Height2,970 mmcorrect
Wheelbase2,700 mmcorrect
Unladen weight6,375 kgcorrect
Gross vehicle weight9,000 kgcorrect

Drivetrain and chassis

Gearbox16 V/12 R and 32 V/24 Rcorrect

Working data

Fuel tank capacity263 lcorrect

Other data

Linkage categoryCat IIcorrect
PTO speed540/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 12.9 kW/t (82 kW / 6.4 t)

Power class: Large (100–180 hp)

Stronger than 71% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case IH MX 110 have?

The Case IH MX 110 delivers 110 hp.

How much does the Case IH MX 110 weigh?

The unladen weight is 6,375 kg.

What is the gross vehicle weight of the Case IH MX 110?

9,000 kg.

What engine does the Case IH MX 110 have?

6 cylinders, 4,380 cm³ displacement.

What are the dimensions of the Case IH MX 110?

4,300 mm × 2,175 mm × 2,970 mm.

When was the Case IH MX 110 built?

Production years: 1999-2000.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Latvian open data portal (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare