Case Model D range
Built: 1939-1953 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Case Model D range is a tractor built in 1939-1953. 26 kW is available.
The engine is water-cooled. Within the range, rated power spans from 13 to 240 kW; with 26 kW, the Model D range sits at the bottom end. Directly alongside are the VA with 13.1 kW below and the IH JX60 4WD with 41 kW above.
Technical data
Engine
| Engine make | Casecorrect |
|---|---|
| Power | 35 hp (26 kW)correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|
Origin and approval
| Plant | USAcorrect |
|---|
Frequently asked questions
How much power does the Case Model D range have?
The Case Model D range delivers 35 hp.
When was the Case Model D range built?
Production years: 1939-1953.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.