StartHarvesting machineryCase IH › WD2303

Case IH WD2303

Series: Case IH Swather

The photo shows the WD 2504 from the same series. Source: https://www.technikboerse.com/ru/gebraucht/-atka-470/case-ih

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the WD2303, Case IH offers a model from the Case IH Swather series. The engine has 6 cylinders, with a displacement of 6,735.1 cm³. Rated speed is 2,100 rpm. Ground clearance is 1,001 mm. Top speed is 26.6 km/h. The tank holds 454.2 litres. The gearbox has 2 forward gears. There are also 2 reverse gears. The electrical system runs on 24 V. 521 Case IH models across 60 series are on record. The model is listed under Harvesting machinery. 12 verified figures from 1 source are on file.

Technical data

Engine

Rated speed2,100 rpmcorrect
Cylinders6correct
Displacement6,735.1 cm³correct
Aspirationturbocharged with intercoolercorrect

Dimensions and weights

Ground clearance1,001correct

Drivetrain and chassis

Gearbox typeDual speed hydrostatic transmissioncorrect
Forward gears2correct
Reverse gears2correct
Top speed26.6 km/hcorrect
System voltage24 Vcorrect

Working data

Fuel tank capacity454.2 lcorrect

Other data

Height3,432correct

Frequently asked questions

What engine does the Case IH WD2303 have?

6 cylinders, 6,735 cm³ displacement.

How fast does the Case IH WD2303 go?

Top speed is 26.6 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare