StartTractorsCase IH › JX1075N

Case IH JX1075N 2WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the Case IH JX1075N belongs to the Case IH 2WD Tractor series. Under the bonnet works a three-cylinder engine displacing 2.9 litres, producing 76 hp (55.9 kW). Rated power is reached at 2,300 rpm.

At 30 km/h, that is as fast as it goes. Width is 1.35 m. Empty, it weighs 2,420 kg.

Within the range, rated power spans from 62.9 to 127 hp; with 76 hp, the JX1075N sits in the lower third. Directly alongside are the JX80 with 73 hp below and the Farmall 75C with 77.1 hp above.

Technical data

Engine

Power76 hp (55.9 kW)correct
Rated speed2,300 rpmcorrect
Torque300correct
Speed at max. torque1,400 rpmcorrect
Cylinders3correct
Displacement2,900.5 cm³correct
Aspirationturbochargedcorrect

Dimensions and weights

Width1,347.2correct
Wheelbase2,036.1correct
Ground clearance266.2correct
Unladen weight2,419.9 kgcorrect

Drivetrain and chassis

Gearbox type16 x 16 w / mechanical gearbox shuttlecorrect
Forward gears16correct
Reverse gears16correct
Top speed29.6 km/hcorrect

Working data

Pump flow71.5 l/mincorrect
Fuel tank capacity56.8 lcorrect

Where this model stands

Power-to-weight ratio: 23.1 kW/t (56 kW / 2.4 t)

Power class: Universal (40–100 hp)

Stronger than 54% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case IH JX1075N have?

The Case IH JX1075N delivers 76 hp.

How much does the Case IH JX1075N weigh?

The unladen weight is 2,420 kg.

What engine does the Case IH JX1075N have?

3 cylinders, 2,900 cm³ displacement.

How fast does the Case IH JX1075N go?

Top speed is 29.6 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare