StartTractorsCase IH › Farmall 110C

Case IH Farmall 110C 4WD

Series: Farmall

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the Case IH Farmall 110C belongs to the Case IH 4WD Tractor series. The engine is a four-cylinder unit displacing 3.4 litres.

Technical data

Engine

Engine makeCase IH FPTcorrect
Engine modelFarmall 110C (2015-Present)correct
Cylinders4correct
Displacement3,400.3 cm³correct
AspirationWastegate turbocharged and aftercooledcorrect

Drivetrain and chassis

Gearbox type4 synchronous gears in 3 non-synchronous rangescorrect
Forward gears12correct
Reverse gears12correct

Other data

Height2,591.1correct

Frequently asked questions

What engine does the Case IH Farmall 110C have?

4 cylinders, 3,400 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare